About Erwin Fire and EMS Frequencies
Quick answer: Fire dispatch for Erwin: Erwin Fire 151.1450 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Erwin: Unicoi County EMS 159.1425 MHz, narrow FM, 115 DPL.
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Erwin conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Erwin Fire | Erwin Fire – Dispatch | 151.1450 In 153.8075 | 141.3 PL | FMN | WNVB858 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Erwin Fire | Erwin Fire – Operations | 151.2125 | 141.3 PL | FMN | WNVB858 |
| Erwin Fire | Erwin Fire – Operations | 151.4075 | 151.4 PL | FMN | WNVB858 |
Unicoi County channels that also cover Erwin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Unicoi County Fire | Unicoi County Fire – Dispatch | 154.9650 In 159.0000 | 100.0 PL | FMN | WPYU316 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Southside Fire | Southside Fire | 151.4975 In 159.0675 | 110.9 PL | FMN | WQFE664 |
| Unicoi County Fire | Fireground Operations | 154.1450 | FMN | WPYU316 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Unicoi County EMS | Unicoi County EMS – Dispatch | 159.1425 In 154.0250 | 115 DPL | FMN | KXB611 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Unicoi County Hospital | Unicoi County Memorial Hospital (Link w/155.34) | 460.6375 | 025 DPL | FMN | WQFG486 |
| Unicoi County Memorial Hospital EMS Encode | Unicoi County Memorial Hospital EMS Encode | 155.3400 | FMN | WQFG486 |
Nearest trunked radio sites
Distances are measured from the center of Erwin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Erwin?
Fire dispatch channels listed for Erwin: Erwin Fire 151.1450 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Erwin?
We do not have a EMS dispatch channel listed specifically for Erwin. The county-level EMS dispatch channels in the same county: Unicoi County EMS 159.1425 MHz, narrow FM, 115 DPL.
What scanner do I need to listen to fire and EMS in Erwin?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Erwin?
For Erwin, start with the Buffalo Mtn Simulcast site of Tennessee Advanced Communications Network (TACN). Its control channels are 856.2375, 857.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Erwin fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Erwin are marked encrypted.