Skip to content

Embreeville Fire and EMS Frequencies

Embreeville in Washington County, Tennessee has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Buffalo Mtn Simulcast (Tennessee Advanced Communications Network (TACN)), about 14 miles away.

About Embreeville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Embreeville: Washington County Fire 154.1750 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Embreeville: Washington County EMS 855.2375 MHz, narrow FM, 023 DPL (backup).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Embreeville, start with the Buffalo Mtn Simulcast site of Tennessee Advanced Communications Network (TACN), about 14 miles away. Its control channels: 856.2375, 857.2375 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Embreeville trunked talkgroups

Tennessee Advanced Communications Network (TACN)

1 encrypted talkgroup (cannot be monitored)
Tennessee Advanced Communications Network (TACN) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
TN-Washington Co-Public SafetyEmbreeville Fire – Operations305967784D Encrypted

Washington County channels that also cover Embreeville

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireLimestone Fire (D155 in)154.1750
In 151.3250
100.0 PLFMNWXK671
Washington County FireNolichucky Fire154.2050
In 151.0400
156.7 PLFMNWZX801
Washington County FireWashington County Fire – Paging /Tone-Outs Only154.2500FMNWQAC749
Washington County FireEmbreeville Fire .154.3850
In 156.0600
141.3 PLFMNWNHV726
Washington County Fire BackupWashington Co Fire854.0125
In 809.0125
156.7 PLFMNWQDY957

EMS Dispatch

EMS Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County EMS BackupWashington Co/Johnson City EMS855.2375
In 810.2375
023 DPLFMNWPKZ245

Nearest trunked radio sites

Distances are measured from the center of Embreeville.

Buffalo Mtn Simulcast · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 51 (hex 33) · NAC 2A4 · about 14 mi away
Control 856.2375, 857.2375
Voice 856.2125, 856.4625, 857.2125, 857.4625, 858.2125, 858.2375, 858.4625, 859.2125, 859.2375, 859.4625
Elizabethton · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 78 (hex 4E) · NAC 2A0 · about 17 mi away
Control 854.0375, 854.4375
Voice 858.0375, 858.7125
Viking Mountain · Tennessee Advanced Communications Network (TACN)
RFSS 3 · Site 25 (hex 19) · NAC 2A0 · about 18 mi away
Control 769.36875
Voice 769.70625, 770.15625, 770.50625, 770.85625, 771.28125, 771.85625, 772.65625, 773.05625, 773.40625, 774.49375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Embreeville?

We do not have a fire dispatch channel listed specifically for Embreeville. The county-level fire dispatch channels in the same county: Washington County Fire 154.1750 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Embreeville?

We do not have a EMS dispatch channel listed specifically for Embreeville. The county-level EMS dispatch channels in the same county: Washington County EMS 855.2375 MHz, narrow FM, 023 DPL (backup).

Do fire departments and EMS use a trunked radio system in Embreeville?

Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Embreeville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Embreeville?

For Embreeville, start with the Buffalo Mtn Simulcast site of Tennessee Advanced Communications Network (TACN). Its control channels are 856.2375, 857.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Embreeville fire and EMS talkgroups encrypted?

1 of the 1 talkgroups listed for Embreeville are marked fully or partly encrypted; a scanner cannot decode encrypted audio.