Skip to content

Williamson County Fire and EMS Frequencies

Williamson County in Tennessee has 1 countywide conventional frequency and 10 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Williamson County Fire and EMS Frequencies

Quick answer: EMS dispatch for Williamson County: Williamson County EMS 463.9250 MHz, NXDN48, RAN 1.

  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Middle Tennessee Regional Trunked Radio System: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Williamson County, start with the Williamson Co Simulcast site of Middle Tennessee Regional Trunked Radio System. Its control channels: 773.13125, 773.88125, 774.63125 MHz.
  • 10 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Williamson County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Williamson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Williamson County EMSWilliamson County Medical Center – Ambulance Units463.9250
In 468.9250
RAN 1NXDN48WPGH743

Williamson County trunked talkgroups

Middle Tennessee Regional Trunked Radio System

10 encrypted talkgroups (cannot be monitored)
Middle Tennessee Regional Trunked Radio System encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Williamson FireWilliamson Fire – Dispatch200804e70D Encrypted
Williamson FireFire Station Alerting205325034D Encrypted
Williamson/Maury Co - Spring HillWilliamson/Maury Co – Spring Hill – Dispatch204214fc5D Encrypted
Williamson/Maury Co - Spring HillWilliamson/Maury Co – Spring Hill – Station Alerting205345036D Encrypted
Williamson Emergency Services Zone 1Williamson Emergency Services Zone 1 – Tactical Channel (County Fire Department/EMS)201084e8cD Encrypted
Williamson Emergency Services Zone 1Williamson Emergency Services Zone 1 – Tactical Channel (County Fire Department/EMS)201094e8dD Encrypted
Williamson Emergency Services Zone 1Williamson Emergency Services Zone 1 – Tactical Channel (County Fire Department/EMS)201104e8eD Encrypted
Williamson Emergency Services Zone 1Williamson Emergency Services Zone 1 – Tactical Channel (County Fire Department/EMS)201114e8fD Encrypted
Williamson EMSWilliamson County EMS Dispatch201904edeD Encrypted
Williamson EMSWilliamson County EMS Station Alerting205335035D Encrypted

Radio system sites in Williamson County

Program the control channel first; your scanner finds the voice channels from it.

Williamson Co Simulcast · Middle Tennessee Regional Trunked Radio System
RFSS 3 · Site 20 (hex 14) · NAC 440
Control 773.13125, 773.88125, 774.63125, 774.90625
Voice 769.11875, 771.10625, 771.48125, 771.83125, 772.13125, 772.38125, 772.58125, 772.78125
Franklin (*) · Middle Tennessee Regional Trunked Radio System
RFSS 3 · Site 21 (hex 15)
Control 774.86875
Voice 769.23125, 769.38125, 769.73125, 769.88125, 774.51875
Fairview TDOT · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 60 (hex 3C) · NAC 2A0
Control 769.08125, 770.10625
Voice 769.40625, 769.75625, 771.06875, 771.40625, 772.28125, 773.08125
Franklin (MTE) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 66 (hex 42) · NAC 2A6
Control 855.1625, 855.9375
Voice 851.775, 852.775, 853.175
Thompson Station (MTE) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 67 (hex 43) · NAC 2A0
Control 854.9125, 856.8625
Voice 851.225, 858.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Williamson County

Common questions

What frequency does EMS or the ambulance service use in Williamson County?

EMS dispatch channels listed for Williamson County: Williamson County EMS 463.9250 MHz, NXDN48, RAN 1.

Do fire departments and EMS use a trunked radio system in Williamson County?

Yes. Fire and EMS talkgroups are listed for Middle Tennessee Regional Trunked Radio System: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Williamson County?

A scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Williamson County?

For Williamson County, start with the Williamson Co Simulcast site of Middle Tennessee Regional Trunked Radio System. Its control channels are 773.13125, 773.88125, 774.63125, 774.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Williamson County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Williamson County are marked encrypted.

Are Williamson County fire and EMS talkgroups encrypted?

10 of the 10 talkgroups listed for Williamson County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.