About Nolensville Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Nolensville: Williamson County EMS 463.9250 MHz, NXDN48, RAN 1.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Middle Tennessee Regional Trunked Radio System: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Nolensville, start with the Cane Ridge (Antioch) site of Tennessee Advanced Communications Network (TACN), about 5 miles away. Its control channels: 769.30625, 774.29375 MHz.
- 10 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Williamson County channels that also cover Nolensville
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Williamson County EMS | Williamson County Medical Center – Ambulance Units | 463.9250 In 468.9250 | RAN 1 | NXDN48 | WPGH743 |
Middle Tennessee Regional Trunked Radio System
10 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Williamson Fire | Williamson Fire – Dispatch | 20080 | 4e70 | D Encrypted |
| Williamson Fire | Fire Station Alerting | 20532 | 5034 | D Encrypted |
| Williamson/Maury Co - Spring Hill | Williamson/Maury Co – Spring Hill – Dispatch | 20421 | 4fc5 | D Encrypted |
| Williamson/Maury Co - Spring Hill | Williamson/Maury Co – Spring Hill – Station Alerting | 20534 | 5036 | D Encrypted |
| Williamson Emergency Services Zone 1 | Williamson Emergency Services Zone 1 – Tactical Channel (County Fire Department/EMS) | 20108 | 4e8c | D Encrypted |
| Williamson Emergency Services Zone 1 | Williamson Emergency Services Zone 1 – Tactical Channel (County Fire Department/EMS) | 20109 | 4e8d | D Encrypted |
| Williamson Emergency Services Zone 1 | Williamson Emergency Services Zone 1 – Tactical Channel (County Fire Department/EMS) | 20110 | 4e8e | D Encrypted |
| Williamson Emergency Services Zone 1 | Williamson Emergency Services Zone 1 – Tactical Channel (County Fire Department/EMS) | 20111 | 4e8f | D Encrypted |
| Williamson EMS | Williamson County EMS Dispatch | 20190 | 4ede | D Encrypted |
| Williamson EMS | Williamson County EMS Station Alerting | 20533 | 5035 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Nolensville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Nolensville?
We do not have a EMS dispatch channel listed specifically for Nolensville. The county-level EMS dispatch channels in the same county: Williamson County EMS 463.9250 MHz, NXDN48, RAN 1.
Do fire departments and EMS use a trunked radio system in Nolensville?
Yes. The county-level systems that cover Nolensville are Fire and EMS talkgroups are listed for Middle Tennessee Regional Trunked Radio System: 10 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Nolensville?
A scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Nolensville?
For Nolensville, start with the Cane Ridge (Antioch) site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.30625, 774.29375 MHz. Program a control channel first; the scanner finds the voice channels from it.