About Wilson County Fire and EMS Frequencies
Quick answer: Fire dispatch for Wilson County: Wilson County EMA (WEMA) 154.0550 MHz, P25, NAC 102.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 8 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Middle Tennessee Regional Trunked Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wilson County, start with the Wilson Central site of Lebanon Public Safety. Its control channels: 769.29375, 771.26875 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Wilson County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County EMA (WEMA) | Bravo – Southern Response | 154.0550 In 151.3925 | NAC 102 | P25 | WQBR281 |
| Wilson County EMA (WEMA) | Alpha – Dispatch | 154.3250 In 153.8300 | NAC 101 | P25 | WQBR281 |
| Wilson County EMA (WEMA) | Charlie – Central Response | 155.1150 In 159.0150 | NAC 103 | P25 | WQIT622 |
| Wilson County EMA (WEMA) | Delta – Western Response | 155.5350 In 151.3250 | NAC 104 | P25 | WQIT622 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County EMA (WEMA) | Volunteer Net (Channel 2) | 37.2600 | 162.2 PL | FM | WQBR281 |
| Wilson County EMA (WEMA) | Volunteer Net (Channel 1) | 37.5000 | 162.2 PL | FM | WQBR281 |
| Wilson County EMA (WEMA) | Command Net | 45.4800 | 162.2 PL | FM | WQBR281 |
| Wilson County EMA (WEMA) | HazMat | 154.1750 | 606 DPL | FMN | WQBR281 |
| Wilson County EMA (WEMA) | HazMat | 154.1750 | NAC 003 | P25 | WQBR281 |
| Wilson County EMA (WEMA) | Administration | 154.3100 | 100.0 PL | FMN | WQBR281 |
| Wilson County EMA (WEMA) | Administration | 154.3100 | NAC 001 | P25 | WQBR281 |
| Wilson County EMA (WEMA) | FireCom | 155.1750 | 192.8 PL | FMN | WQBR281 |
| Wilson County EMA (WEMA) | FireCom | 155.1750 | NAC 002 | P25 | WQBR281 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County EMA (WEMA) | Medics-to-Hospitals (Patient Reports) | 159.1200 In 150.9950 | NAC 180 | P25 Encrypted | WQIE541 |
Wilson County trunked talkgroups
Middle Tennessee Regional Trunked Radio System
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Williamson/Maury Co - Spring Hill | Williamson/Maury Co – Spring Hill – Dispatch | 20421 | 4fc5 | D Encrypted |
| Williamson/Maury Co - Spring Hill | Williamson/Maury Co – Spring Hill – Station Alerting | 20534 | 5036 | D Encrypted |
Radio system sites in Wilson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Wilson County
Common questions
What frequency does the fire department use in Wilson County?
Fire dispatch channels listed for Wilson County: Wilson County EMA (WEMA) 154.0550 MHz, P25, NAC 102.
Do fire departments and EMS use a trunked radio system in Wilson County?
Yes. Fire and EMS talkgroups are listed for Middle Tennessee Regional Trunked Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wilson County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wilson County?
For Wilson County, start with the Wilson Central site of Lebanon Public Safety. Its control channels are 769.29375, 771.26875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wilson County fire and EMS frequencies encrypted?
1 of the 14 conventional frequencies listed for Wilson County are marked encrypted; a scanner cannot decode encrypted audio.
Are Wilson County fire and EMS talkgroups encrypted?
2 of the 2 talkgroups listed for Wilson County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.