About Statesville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Statesville: Wilson County EMA (WEMA) 154.0550 MHz, P25, NAC 102.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 8 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Middle Tennessee Regional Trunked Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Statesville, start with the Wilson/Watertown (MTE) site of Tennessee Advanced Communications Network (TACN), about 4 miles away. Its control channels: 855.6875, 856.6875, 859.3875 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Wilson County channels that also cover Statesville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County EMA (WEMA) | Bravo – Southern Response | 154.0550 In 151.3925 | NAC 102 | P25 | WQBR281 |
| Wilson County EMA (WEMA) | Alpha – Dispatch | 154.3250 In 153.8300 | NAC 101 | P25 | WQBR281 |
| Wilson County EMA (WEMA) | Charlie – Central Response | 155.1150 In 159.0150 | NAC 103 | P25 | WQIT622 |
| Wilson County EMA (WEMA) | Delta – Western Response | 155.5350 In 151.3250 | NAC 104 | P25 | WQIT622 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County EMA (WEMA) | Volunteer Net (Channel 2) | 37.2600 | 162.2 PL | FM | WQBR281 |
| Wilson County EMA (WEMA) | Volunteer Net (Channel 1) | 37.5000 | 162.2 PL | FM | WQBR281 |
| Wilson County EMA (WEMA) | Command Net | 45.4800 | 162.2 PL | FM | WQBR281 |
| Wilson County EMA (WEMA) | HazMat | 154.1750 | 606 DPL | FMN | WQBR281 |
| Wilson County EMA (WEMA) | HazMat | 154.1750 | NAC 003 | P25 | WQBR281 |
| Wilson County EMA (WEMA) | Administration | 154.3100 | 100.0 PL | FMN | WQBR281 |
| Wilson County EMA (WEMA) | Administration | 154.3100 | NAC 001 | P25 | WQBR281 |
| Wilson County EMA (WEMA) | FireCom | 155.1750 | 192.8 PL | FMN | WQBR281 |
| Wilson County EMA (WEMA) | FireCom | 155.1750 | NAC 002 | P25 | WQBR281 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County EMA (WEMA) | Medics-to-Hospitals (Patient Reports) | 159.1200 In 150.9950 | NAC 180 | P25 Encrypted | WQIE541 |
Middle Tennessee Regional Trunked Radio System
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Williamson/Maury Co - Spring Hill | Williamson/Maury Co – Spring Hill – Dispatch | 20421 | 4fc5 | D Encrypted |
| Williamson/Maury Co - Spring Hill | Williamson/Maury Co – Spring Hill – Station Alerting | 20534 | 5036 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Statesville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Statesville?
We do not have a fire dispatch channel listed specifically for Statesville. The county-level fire dispatch channels in the same county: Wilson County EMA (WEMA) 154.0550 MHz, P25, NAC 102.
Do fire departments and EMS use a trunked radio system in Statesville?
Yes. The county-level systems that cover Statesville are Fire and EMS talkgroups are listed for Middle Tennessee Regional Trunked Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Statesville?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Statesville?
For Statesville, start with the Wilson/Watertown (MTE) site of Tennessee Advanced Communications Network (TACN). Its control channels are 855.6875, 856.6875, 859.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.