Skip to content

Adams County Fire and EMS Frequencies

Adams County in Washington has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Adams County Fire and EMS Frequencies

Quick answer: Fire dispatch for Adams County: Adams County Fire 158.8275 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Adams County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams (Othello) Fire Dispatch158.8275FMN—
Adams County FireAdams (Ritzville), Adams 2 (Lind), Adams 6 (Benge), Adams 7 (Washtucna), East Adams Rural EMS, and Othello EMS158.9700
In 154.7100
77.0 PLFMNWPKS370

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams County Fire – Tactical Channel154.010077.0 PLFMNKNHN685
Adams County Fire TacAdams County Fire Tactical154.190077.0 PLFMNWQBC214

Radio system sites in Adams County

Program the control channel first; your scanner finds the voice channels from it.

Othello (Hart Road) · Benton-Franklin County P25
Project 25 · RFSS 1 · Site 5 (hex 5) · NAC 340
Control 856.2125, 856.7125
Voice 854.05, 855.25, 855.4625, 855.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Adams County

Common questions

What frequency does the fire department use in Adams County?

Fire dispatch channels listed for Adams County: Adams County Fire 158.8275 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Adams County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Adams County?

For Adams County, start with the Othello (Hart Road) site of Benton-Franklin County P25. Its control channels are 856.2125, 856.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Adams County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Adams County are marked encrypted.