Skip to content

Washtucna Fire and EMS Frequencies

We do not have frequencies listed specifically for Washtucna in Adams County, Washington yet. Countywide channels for Adams County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Franklin Co Simulcast (Benton-Franklin County P25), about 25 miles away.

About Washtucna Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Washtucna: Adams County Fire 158.8275 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Adams County channels that also cover Washtucna

Fire Dispatch

Fire Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams (Othello) Fire Dispatch158.8275FMN—
Adams County FireAdams (Ritzville), Adams 2 (Lind), Adams 6 (Benge), Adams 7 (Washtucna), East Adams Rural EMS, and Othello EMS158.9700
In 154.7100
77.0 PLFMNWPKS370

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams County Fire – Tactical Channel154.010077.0 PLFMNKNHN685
Adams County Fire TacAdams County Fire Tactical154.190077.0 PLFMNWQBC214

Nearest trunked radio sites

Distances are measured from the center of Washtucna.

Franklin Co Simulcast · Benton-Franklin County P25
Project 25 · RFSS 1 · Site 3 (hex 3) · about 25 mi away
Control 854.675
Voice 854.0375, 854.1, 854.1625, 854.225, 854.2875, 854.35, 854.425, 854.525, 854.5875
Othello (Hart Road) · Benton-Franklin County P25
Project 25 · RFSS 1 · Site 5 (hex 5) · NAC 340 · about 46 mi away
Control 856.2125, 856.7125
Voice 854.05, 855.25, 855.4625, 855.9875
Williams Lake · Spokane Regional Emergency Communications System
RFSS 1 · Site 4 (hex 4) · NAC 444 · about 49 mi away
Control 853.7, 853.9375
Voice 851.8875, 852.6875, 853.2625, 853.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Washtucna?

We do not have a fire dispatch channel listed specifically for Washtucna. The county-level fire dispatch channels in the same county: Adams County Fire 158.8275 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Washtucna?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Washtucna?

For Washtucna, start with the Franklin Co Simulcast site of Benton-Franklin County P25. Its control channels are 854.675 MHz. Program a control channel first; the scanner finds the voice channels from it.