Skip to content

Dayton Fire and EMS Frequencies

We do not have frequencies listed specifically for Dayton in Columbia County, Washington yet. Countywide channels for Columbia County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Franklin Co Simulcast (Benton-Franklin County P25), about 45 miles away.

About Dayton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Dayton: Columbia County Fire 153.8750 MHz, narrow FM, 67.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Columbia County channels that also cover Dayton

Fire Dispatch

Fire Dispatch frequencies for Columbia County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Columbia County FireFire District 3 Dispatch153.8750
In 155.6100
67.0 PLFMNWRZ647

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Columbia County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Columbia County FireFire District 3 Tactical153.875067.0 PLFMN—
Columbia County FireFire District 3 Tactical154.400067.0 PLFMNWRZ647
Columbia County FireFire District 3 Starkbuck154.4450
In 150.7900
100.0 PLFMNWRZ647
Columbia County FireFire District 3 Delany156.0000
In 154.1300
67.0 PLFMNWRZ647

Nearest trunked radio sites

Distances are measured from the center of Dayton.

Franklin Co Simulcast · Benton-Franklin County P25
Project 25 · RFSS 1 · Site 3 (hex 3) · about 45 mi away
Control 854.675
Voice 854.0375, 854.1, 854.1625, 854.225, 854.2875, 854.35, 854.425, 854.525, 854.5875
Benton Co Simulcast · Benton-Franklin County P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 341 · about 64 mi away
Control 858.9375, 858.9625, 859.9375, 859.9625
Voice 854.0125, 854.25, 854.4125, 854.5125, 856.9375, 856.9625, 857.9375, 857.9625
Othello (Hart Road) · Benton-Franklin County P25
Project 25 · RFSS 1 · Site 5 (hex 5) · NAC 340 · about 69 mi away
Control 856.2125, 856.7125
Voice 854.05, 855.25, 855.4625, 855.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dayton?

We do not have a fire dispatch channel listed specifically for Dayton. The county-level fire dispatch channels in the same county: Columbia County Fire 153.8750 MHz, narrow FM, 67.0 PL.

What scanner do I need to listen to fire and EMS in Dayton?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Dayton?

For Dayton, start with the Franklin Co Simulcast site of Benton-Franklin County P25. Its control channels are 854.675 MHz. Program a control channel first; the scanner finds the voice channels from it.