Skip to content

Columbia County Fire and EMS Frequencies

Columbia County in Washington has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Columbia County Fire and EMS Frequencies

Quick answer: Fire dispatch for Columbia County: Columbia County Fire 153.8750 MHz, narrow FM, 67.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Columbia County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Columbia County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Columbia County FireFire District 3 Dispatch153.8750
In 155.6100
67.0 PLFMNWRZ647

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Columbia County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Columbia County FireFire District 3 Tactical153.875067.0 PLFMN—
Columbia County FireFire District 3 Tactical154.400067.0 PLFMNWRZ647
Columbia County FireFire District 3 Starkbuck154.4450
In 150.7900
100.0 PLFMNWRZ647
Columbia County FireFire District 3 Delany156.0000
In 154.1300
67.0 PLFMNWRZ647

Radio system sites in Columbia County

Program the control channel first; your scanner finds the voice channels from it.

Rainier Hill · CRESA 911
RFSS 1 · Site 3 (hex 3) · NAC 863
Control 852.825, 853.375, 853.9375
Voice 851.2125, 851.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Columbia County

Common questions

What frequency does the fire department use in Columbia County?

Fire dispatch channels listed for Columbia County: Columbia County Fire 153.8750 MHz, narrow FM, 67.0 PL.

What scanner do I need to listen to fire and EMS in Columbia County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Columbia County?

For Columbia County, start with the Rainier Hill site of CRESA 911. Its control channels are 852.825, 853.375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Columbia County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Columbia County are marked encrypted.