About Dixie Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Dixie: Walla Walla County Fire 154.4300 MHz, narrow FM, 151.4 PL.
- 21 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Walla Walla County channels that also cover Dixie
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walla Walla County Fire | Fire Primary Simulcast | 154.4300 In 155.8050 | 151.4 PL | FMN | WPPV874 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walla Walla County Fire | Emergency Farm Communications Patched to UHF | 151.5050 | 82.5 PL | FMN | WQYJ959 |
| Walla Walla County Fire | Tactical Y | 153.7700 | 151.4 PL | FMN | KOK870 |
| Walla Walla County Fire | Fire Emergency | 153.8000 | 167.9 PL | FMN | WQTE758 |
| Walla Walla County Fire | Tactical Z | 154.1600 | 151.4 PL | FMN | KBS931 |
| Walla Walla County Fire | Tactical X | 154.2350 | 151.4 PL | FMN | KOK870 |
| Walla Walla County Fire | Fire Coppei | 154.2950 In 158.8800 | 103.5 PL | FMN | WQUL790 |
| Walla Walla County Fire | Fire Pikes | 154.3325 In 159.2100 | 151.4 PL | FMN | WQUL790 |
| Walla Walla County Fire | Tactical W | 154.3700 | 151.4 PL | FMN | KNFP525 |
| Walla Walla County Fire | Fire Wallula | 154.3700 In 159.0000 | 173.8 PL | FMN | WQUL790 |
| Walla Walla County Fire | Fire Hair and Valley | 155.1300 In 159.0525 | 151.4 PL | FMN | WQUL790 |
| Walla Walla County Fire | Fire Common | 156.0450 In 154.0250 | 173.8 PL | FMN | WPPV874 |
| Walla Walla County Fire | Black Portable Repeater | 159.1350 In 153.8450 | 131.8 PL | FMN | KBS931 |
| Walla Walla County Fire | White Portable Repeater | 159.1650 In 153.9500 | 146.2 PL | FMN | KBS931 |
| Walla Walla County Fire | Fire Eureka | 159.1725 In 155.7900 | 162.2 PL | FMN | WQUL790 |
| Walla Walla County Fire | Tactical U | 159.1800 | 151.4 PL | FMN | WQUL790 |
| Walla Walla County Fire | Emergency Farm Communications Patched to VHF | 451.8000 | 82.5 PL | FMN | WQYJ959 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Providence Southgate Medical Complex | Operations | 461.3250 In 466.3250 | 146.2 PL | FMN | WQAG339 |
| Providence St. Mary Medical Center | Operations | 461.1250 In 466.1250 | 125 DPL | FMN | WQLW255 |
| Providence St. Mary Medical Center | Security | 463.2750 In 468.2750 | 116 DPL | FMN | WQLW255 |
| Providence St. Mary Medical Center | Operations | 464.7750 In 469.7750 | 115 DPL | FMN | WQLW255 |
Nearest trunked radio sites
Distances are measured from the center of Dixie.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dixie?
We do not have a fire dispatch channel listed specifically for Dixie. The county-level fire dispatch channels in the same county: Walla Walla County Fire 154.4300 MHz, narrow FM, 151.4 PL.
What scanner do I need to listen to fire and EMS in Dixie?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Dixie?
For Dixie, start with the Franklin Co Simulcast site of Benton-Franklin County P25. Its control channels are 854.675 MHz. Program a control channel first; the scanner finds the voice channels from it.