Skip to content

Point Roberts Fire and EMS Frequencies

We do not have frequencies listed specifically for Point Roberts in Whatcom County, Washington yet. Countywide channels for Whatcom County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Darrington (Sno911), about 85 miles away.

About Point Roberts Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Point Roberts: Whatcom County Fire 154.4300 MHz, narrow FM, 114.8 PL.

  • 21 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (TELM), which needs a scanner that decodes that mode.

Data updated .

Whatcom County channels that also cover Point Roberts

Fire Dispatch

Fire Dispatch frequencies for Whatcom County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Whatcom County FireV-Fire154.4300114.8 PLFMNKOK851

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Whatcom County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Whatcom County FireV-Fire Tactical154.3250114.8 PLFMN—
Whatcom County FireV-Fire Tactical158.9775114.8 PLFMN—
Whatcom County FireV-Fire Tactical159.0975
In 159.0750
114.8 PLFMN—
Whatcom County FireV-Fire Tactical159.2175114.8 PLFMN—
Whatcom County FireV-Fire Tactical159.2175114.8 PLFMN—

Fire Talk-around

Fire Talk-around frequencies for Whatcom County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chuckanut Fire DistrictChuckanut Fire Dist/Skagit Co Common154.2650FMNKNAC690
Whatcom County FireWCFD1 (Everson) Low Band F-146.1400FMKOI654
Whatcom County FireV-Fire153.8750114.8 PLFMN—
Whatcom County FireV-Fire154.2200114.8 PLFMNKNBB636
Whatcom County FireV-Fire154.3400114.8 PLFMNKOK851
Whatcom County FireV-Fire155.2950
In 154.9950
114.8 PLFMNKOK851
Whatcom County FireV-Fire158.8425
In 154.0250
114.8 PLFMN—
Whatcom County FireV-Fire159.7950
In 151.5500
114.8 PLFMN—
Whatcom County FireWhatcom County Fire – Alternate453.1875FMNWPUR232
Whatcom County FireWhatcom County Fire – Alternate453.2875
In 458.2875
173.8 PLFMNKB41879
Whatcom County FireWhatcom County Fire – Alternate453.5875FMNWPUR232
Whatcom County FireWhatcom County Fire – Vehicle Repeaters460.5250FMNKUQ750
Whatcom County FireWhatcom County Fire – Alternate852.8125
In 807.8125
FMWPIZ620

Hospitals & Medical

Hospitals & Medical frequencies for Whatcom County
AgencyDescriptionFrequency (MHz)ToneModeFCC
HospitalsSt. Joseph's Hospital – Pagers157.4500TELMWNQH964
Local Government ServicesNorthwest Regional Council453.0875FMNWPHC829
Local Government ServicesNorthwest Regional Council458.0250FMNKX9467

Nearest trunked radio sites

Distances are measured from the center of Point Roberts.

Darrington · Sno911
RFSS 1 · Site 11 (hex B) · NAC 3AB · about 85 mi away
Control 854.7375
Voice 852.775, 852.9875, 853.6625, 854.1125, 854.2625
North Simulcast · Sno911
RFSS 1 · Site 8 (hex 8) · NAC 3A8 · about 91 mi away
Control 853.5875, 853.6125, 853.75, 853.925
Voice 852.675, 852.9125, 852.9625, 853.3625, 853.3875
South Simulcast · Sno911
RFSS 1 · Site 7 (hex 7) · NAC 3A7 · about 91 mi away
Control 853.85, 854.0125, 854.2125, 854.5625
Voice 851.1125, 851.7375, 852.9375, 853.3, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Point Roberts?

We do not have a fire dispatch channel listed specifically for Point Roberts. The county-level fire dispatch channels in the same county: Whatcom County Fire 154.4300 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Point Roberts?

The analog conventional channels can be heard on any scanner; a scanner that decodes TELM is needed for the digital conventional channels.

What are the control channels for trunked radio in Point Roberts?

For Point Roberts, start with the Darrington site of Sno911. Its control channels are 854.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.