Skip to content

Roche Harbor Fire and EMS Frequencies

We do not have frequencies listed specifically for Roche Harbor in San Juan County, Washington yet. Countywide channels for San Juan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Darrington (Sno911), about 76 miles away.

About Roche Harbor Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Roche Harbor: San Juan County Fire 154.2050 MHz, narrow FM, 192.8 PL. County-level ems dispatch that covers Roche Harbor: San Juan County EMS 155.2800 MHz, narrow FM, 203.5 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

San Juan County channels that also cover Roche Harbor

Fire Dispatch

Fire Dispatch frequencies for San Juan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
San Juan County FireFire Dist 2 Orcas Island Dispatch154.2050
In 153.8300
192.8 PLFMNKTV625
San Juan County FireFire Lopez-Shaw Island Dispatch155.1000203.5 PLFMNWNVN795
San Juan County FireFire Dist 3 San Juan Island Dispatch North155.1450203.5 PLFMNWQDT933
San Juan County FireFire Dist 3 San Juan Island Dispatch South155.7975203.5 PLFMNWQDT933

Fire Ground / Tactical

Fire Ground / Tactical frequencies for San Juan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
San Juan County FireFire Dist 2 Orcas Island Tactical154.1600192.8 PLFMNKTV625
San Juan County FireFire Dist 2 Orcas Island Tactical154.3850192.8 PLFMNKTV625

EMS Dispatch

EMS Dispatch frequencies for San Juan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
San Juan County EMSSan Juan County EMS155.2800203.5 PLFMNKDW376

Nearest trunked radio sites

Distances are measured from the center of Roche Harbor.

Darrington · Sno911
RFSS 1 · Site 11 (hex B) · NAC 3AB · about 76 mi away
Control 854.7375
Voice 852.775, 852.9875, 853.6625, 854.1125, 854.2625
North Simulcast · Sno911
RFSS 1 · Site 8 (hex 8) · NAC 3A8 · about 78 mi away
Control 853.5875, 853.6125, 853.75, 853.925
Voice 852.675, 852.9125, 852.9625, 853.3625, 853.3875
South Simulcast · Sno911
RFSS 1 · Site 7 (hex 7) · NAC 3A7 · about 78 mi away
Control 853.85, 854.0125, 854.2125, 854.5625
Voice 851.1125, 851.7375, 852.9375, 853.3, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Roche Harbor?

We do not have a fire dispatch channel listed specifically for Roche Harbor. The county-level fire dispatch channels in the same county: San Juan County Fire 154.2050 MHz, narrow FM, 192.8 PL.

What frequency does EMS or the ambulance service use in Roche Harbor?

We do not have a EMS dispatch channel listed specifically for Roche Harbor. The county-level EMS dispatch channels in the same county: San Juan County EMS 155.2800 MHz, narrow FM, 203.5 PL.

What scanner do I need to listen to fire and EMS in Roche Harbor?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Roche Harbor?

For Roche Harbor, start with the Darrington site of Sno911. Its control channels are 854.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.