About Pullman Fire and EMS Frequencies
Quick answer: Fire dispatch for Pullman: Pullman Fire 154.1450 MHz, narrow FM, 103.5 PL.
- 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Pullman conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pullman Fire | Pullman Fire – Dispatch | 154.1450 In 154.3625 | 103.5 PL | FMN | WPDS908 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pullman Fire | Pullman Fire – Tactical Channel (WSU) | 154.2350 In 156.0150 | 186.2 PL | FMN | WPHY634 |
| Pullman Fire | Pullman Fire – Tactical Channel | 154.4150 | 136.5 PL | FMN | KD53675 |
Whitman County channels that also cover Pullman
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Whitman County Fire | North Fire (Districts 4, 12,14) | 154.0925 In 158.8725 | 203.5 PL | FMN | WQXW285 |
| Whitman County Fire | East Fire (Districts 1,2,3,5,7,10) | 154.3850 In 150.7750 | 151.4 PL | FMN | WXB913 |
| Whitman County Fire | Fire District 11 – Colfax | 155.4000 In 158.9250 | 110.9 PL | FMN | KOL540 |
| Whitman County Fire | West Fire (Districts 6,8.13) | 158.8500 In 156.0600 | 173.8 PL | FMN | WQBL853 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Whitman County Fire | Fire District 12 Tactical | 154.4150 | 103.5 PL | FMN | WXB913 |
| Whitman County Fire | Colfax Fire Tactical | 154.4300 | 136.5 PL | FMN | KOL540 |
| Whitman County Fire | County Fire Tactical | 155.1150 | 88.5 PL | FMN | WPVX275 |
| Whitman County Fire | East Tactical | 155.3250 | 88.5 PL | FMN | WQXY255 |
| Whitman County Fire | West Tactical | 155.7825 | 88.5 PL | FMN | WQXW267 |
| Whitman County Fire | North Tactical | 155.9025 | 88.5 PL | FMN | WQXW285 |
Nearest trunked radio sites
Distances are measured from the center of Pullman.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pullman?
Fire dispatch channels listed for Pullman: Pullman Fire 154.1450 MHz, narrow FM, 103.5 PL.
What scanner do I need to listen to fire and EMS in Pullman?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Pullman?
For Pullman, start with the Tekoa site of Spokane Regional Emergency Communications System. Its control channels are 853.3125, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pullman fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Pullman are marked encrypted.