About Steptoe Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Steptoe: Whitman County Fire 154.0925 MHz, narrow FM, 203.5 PL.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Whitman County channels that also cover Steptoe
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Whitman County Fire | North Fire (Districts 4, 12,14) | 154.0925 In 158.8725 | 203.5 PL | FMN | WQXW285 |
| Whitman County Fire | East Fire (Districts 1,2,3,5,7,10) | 154.3850 In 150.7750 | 151.4 PL | FMN | WXB913 |
| Whitman County Fire | Fire District 11 – Colfax | 155.4000 In 158.9250 | 110.9 PL | FMN | KOL540 |
| Whitman County Fire | West Fire (Districts 6,8.13) | 158.8500 In 156.0600 | 173.8 PL | FMN | WQBL853 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Whitman County Fire | Fire District 12 Tactical | 154.4150 | 103.5 PL | FMN | WXB913 |
| Whitman County Fire | Colfax Fire Tactical | 154.4300 | 136.5 PL | FMN | KOL540 |
| Whitman County Fire | County Fire Tactical | 155.1150 | 88.5 PL | FMN | WPVX275 |
| Whitman County Fire | East Tactical | 155.3250 | 88.5 PL | FMN | WQXY255 |
| Whitman County Fire | West Tactical | 155.7825 | 88.5 PL | FMN | WQXW267 |
| Whitman County Fire | North Tactical | 155.9025 | 88.5 PL | FMN | WQXW285 |
Nearest trunked radio sites
Distances are measured from the center of Steptoe.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Steptoe?
We do not have a fire dispatch channel listed specifically for Steptoe. The county-level fire dispatch channels in the same county: Whitman County Fire 154.0925 MHz, narrow FM, 203.5 PL.
What scanner do I need to listen to fire and EMS in Steptoe?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Steptoe?
For Steptoe, start with the Tekoa site of Spokane Regional Emergency Communications System. Its control channels are 853.3125, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.