Skip to content

Clam Lake Fire and EMS Frequencies

We do not have frequencies listed specifically for Clam Lake in Ashland County, Wisconsin yet. Countywide channels for Ashland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mellen (WISCOM), about 15 miles away.

About Clam Lake Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Clam Lake: Ashland County Fire 154.9950 MHz, narrow FM, 251 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Ashland County channels that also cover Clam Lake

Fire Dispatch

Fire Dispatch frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ashland County FireAshland County Fire – Dispatch154.9950
In 153.8600
251 DPLFMNWPXW563

Fire Talk-around

Fire Talk-around frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bad River Band of Lake Superior Chippewa Indians FireBad River Band of Lake Superior Chippewa Indians Fire – Alternate154.1450107.2 PLFMNWQBC355

EMS Talk-around

EMS Talk-around frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesMemorial Medical Center155.1750107.2 PLFMNWQBJ709

Hospitals & Medical

Hospitals & Medical frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesEMS to Memorial Medical Center155.3400107.2 PLFMNWQBJ709

Nearest trunked radio sites

Distances are measured from the center of Clam Lake.

Mellen · WISCOM
RFSS 1 · Site 63 (hex 3F) · NAC B06 · about 15 mi away
Control 139.0875, 152.0375, 152.7875
Voice 151.235, 154.385
Grand View · WISCOM
RFSS 1 · Site 106 (hex 6A) · NAC B01 · about 18 mi away
Control 139.6375, 152.1125, 152.2025, 152.6525, 152.8025
Cable · WISCOM
RFSS 1 · Site 124 (hex 7C) · NAC B0C · about 19 mi away
Control 151.2575, 152.5025, 155.325
Voice 151.475, 154.695
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Clam Lake?

We do not have a fire dispatch channel listed specifically for Clam Lake. The county-level fire dispatch channels in the same county: Ashland County Fire 154.9950 MHz, narrow FM, 251 DPL.

What scanner do I need to listen to fire and EMS in Clam Lake?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Clam Lake?

For Clam Lake, start with the Mellen site of WISCOM. Its control channels are 139.0875, 152.0375, 152.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.