Skip to content

Bluffview Fire and EMS Frequencies

We do not have frequencies listed specifically for Bluffview in Sauk County, Wisconsin yet. Countywide channels for Sauk County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Baraboo (WISCOM), about 8 miles away.

About Bluffview Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bluffview: Sauk County Fire 151.2500 MHz, narrow FM, 97.4 PL. Trunked: WISCOM, for example Sauk County EMS talkgroup 57106 (hex df12).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bluffview, start with the Baraboo site of WISCOM, about 8 miles away. Its control channels: 139.1875, 152.1425, 152.7275 MHz.

Data updated .

Sauk County channels that also cover Bluffview

Fire Dispatch

Fire Dispatch frequencies for Sauk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sauk County FireFire/EMS Dispatch151.2500
In 153.7700
97.4 PLFMNKNGE418
Sauk County FireFire/EMS Paging155.7750
In 153.9800
82.5 PLFMNKNGE418

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sauk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sauk County FireFireground "High Fire"154.370082.5 PLFMNWQP827

Fire Talk-around

Fire Talk-around frequencies for Sauk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hillpoint FireHillpoint Fire – Alternate155.0325
In 153.8825
503 DPLFMNWQVI333

EMS Talk-around

EMS Talk-around frequencies for Sauk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sauk County EMSCounty EMS155.205082.5 PLFMNWPKC831

Hospitals & Medical

Hospitals & Medical frequencies for Sauk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sauk-Prairie Memorial HospitalSauk-Prairie Memorial Hospital EMS-B155.3400141.3 PLFMNWPDH873
St. Clare HospitalBLS Ambulance to Hospital155.3400100.0 PLFMNKRZ814
St. Clare HospitalMED 2 Paramedic Intercepts155.3850
In 150.7750
261 DPLFMNKRZ814

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Sauk County EMSBaraboo District Ambulance Service57106df12D
Sauk County EMSDells-Delton EMS57110df16D

Nearest trunked radio sites

Distances are measured from the center of Bluffview.

Baraboo · WISCOM
RFSS 1 · Site 2 (hex 2) · NAC B0C · about 8 mi away
Control 139.1875, 152.1425, 152.7275
Voice 151.445, 152.0225
DOC Portage · WISCOM
RFSS 1 · Site 201 (hex C9) · NAC B0C · about 20 mi away
Control 851.3875, 851.8875
Voice 852.3875, 852.8875, 853.3875
Blue Mounds · WISCOM
RFSS 1 · Site 3 (hex 3) · NAC B0F · about 24 mi away
Control 139.3125, 140.3625, 152.1575, 152.6625
Voice 155.4525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bluffview?

We do not have a fire dispatch channel listed specifically for Bluffview. The county-level fire dispatch channels in the same county: Sauk County Fire 151.2500 MHz, narrow FM, 97.4 PL.

Do fire departments and EMS use a trunked radio system in Bluffview?

Yes. The county-level systems that cover Bluffview are Fire and EMS talkgroups are listed for WISCOM: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bluffview?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bluffview?

For Bluffview, start with the Baraboo site of WISCOM. Its control channels are 139.1875, 152.1425, 152.7275 MHz. Program a control channel first; the scanner finds the voice channels from it.