Lake Wisconsin also extends into Columbia County.
About Lake Wisconsin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lake Wisconsin: Sauk County Fire 151.2500 MHz, narrow FM, 97.4 PL. Trunked: WISCOM, for example Sauk County EMS talkgroup 57106 (hex df12).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WISCOM: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lake Wisconsin, start with the Baraboo site of WISCOM, about 5 miles away. Its control channels: 139.1875, 152.1425, 152.7275 MHz.
Data updated .
Sauk County channels that also cover Lake Wisconsin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sauk County Fire | Fire/EMS Dispatch | 151.2500 In 153.7700 | 97.4 PL | FMN | KNGE418 |
| Sauk County Fire | Fire/EMS Paging | 155.7750 In 153.9800 | 82.5 PL | FMN | KNGE418 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sauk County Fire | Fireground "High Fire" | 154.3700 | 82.5 PL | FMN | WQP827 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hillpoint Fire | Hillpoint Fire – Alternate | 155.0325 In 153.8825 | 503 DPL | FMN | WQVI333 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sauk County EMS | County EMS | 155.2050 | 82.5 PL | FMN | WPKC831 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sauk-Prairie Memorial Hospital | Sauk-Prairie Memorial Hospital EMS-B | 155.3400 | 141.3 PL | FMN | WPDH873 |
| St. Clare Hospital | BLS Ambulance to Hospital | 155.3400 | 100.0 PL | FMN | KRZ814 |
| St. Clare Hospital | MED 2 Paramedic Intercepts | 155.3850 In 150.7750 | 261 DPL | FMN | KRZ814 |
WISCOM
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sauk County EMS | Baraboo District Ambulance Service | 57106 | df12 | D |
| Sauk County EMS | Dells-Delton EMS | 57110 | df16 | D |
Nearest trunked radio sites
Distances are measured from the center of Lake Wisconsin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lake Wisconsin?
We do not have a fire dispatch channel listed specifically for Lake Wisconsin. The county-level fire dispatch channels in the same county: Sauk County Fire 151.2500 MHz, narrow FM, 97.4 PL.
Do fire departments and EMS use a trunked radio system in Lake Wisconsin?
Yes. The county-level systems that cover Lake Wisconsin are Fire and EMS talkgroups are listed for WISCOM: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lake Wisconsin?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lake Wisconsin?
For Lake Wisconsin, start with the Baraboo site of WISCOM. Its control channels are 139.1875, 152.1425, 152.7275 MHz. Program a control channel first; the scanner finds the voice channels from it.