About Fulton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fulton: Emergency Management/Fire/EMS 154.4300 MHz, narrow FM, 107.2 PL. County-level ems dispatch that covers Fulton: Emergency Management/Fire/EMS 155.9550 MHz, narrow FM, 146.2 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Fountain County EMS talkgroup 10257 (hex 2811).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fulton, start with the Newport site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 857.9625, 858.5125, 859.9625 MHz.
Data updated .
Fountain County channels that also cover Fulton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Dispatch | 154.4300 In 159.0525 | 107.2 PL | FMN | WPLS514 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Tactical Channel | 153.9500 | FMN | WPKY952 | |
| Emergency Management/Fire/EMS | Emergency Management Operations | 453.1750 In 458.1750 | 114.8 PL | FMN | WQIW312 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Dispatch | 155.9550 | 146.2 PL | FMN | KNDK594 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fountain County EMS | Fountain County EMS – Dispatch | 10257 | 2811 | D |
| Fountain County EMS | Fountain County EMS – Tactical Channel | 10258 | 2812 | D |
Nearest trunked radio sites
Distances are measured from the center of Fulton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fulton?
We do not have a fire dispatch channel listed specifically for Fulton. The county-level fire dispatch channels in the same county: Emergency Management/Fire/EMS 154.4300 MHz, narrow FM, 107.2 PL.
What frequency does EMS or the ambulance service use in Fulton?
We do not have a EMS dispatch channel listed specifically for Fulton. The county-level EMS dispatch channels in the same county: Emergency Management/Fire/EMS 155.9550 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Fulton?
Yes. The county-level systems that cover Fulton are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fulton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fulton?
For Fulton, start with the Newport site of Indiana Project Hoosier SAFE-T. Its control channels are 857.9625, 858.5125, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.