Skip to content

Eugene Fire and EMS Frequencies

We do not have frequencies listed specifically for Eugene in Vermillion County, Indiana yet. Countywide channels for Vermillion County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Newport (Indiana Project Hoosier SAFE-T), about 2 miles away.

About Eugene Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Eugene: Vermillion County Fire 154.2200 MHz, narrow FM, 210.7 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Vermillion County Fire talkgroup 12377 (hex 3059).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Eugene, start with the Newport site of Indiana Project Hoosier SAFE-T, about 2 miles away. Its control channels: 857.9625, 858.5125, 859.9625 MHz.

Data updated .

Vermillion County channels that also cover Eugene

Fire Dispatch

Fire Dispatch frequencies for Vermillion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Vermillion County FireVermillion County Fire – Dispatch (Simulcast with SAFE-T)154.2200210.7 PLFMNWPEQ742

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Vermillion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton Township FireClinton Township Fire – Tactical154.3400FMNKUF640

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Vermillion County FireVermillion County Fire – Dispatch (County)123773059D
Vermillion County FireVermillion County Fire – Fire Ground (County)123753057D
Vermillion County FireVermillion County Fire – Fire Ground (County)123763058D
Vermillion County FireVermillion County Fire – Administration (County)12366304eD
Vermillion County EMSVermillion County EMS – Dispatch (County)12363304bD
Vermillion County EMSVermillion County EMS – Talk-Around (County)123743056D
Vermillion County HospitalUnion Hospital Clinton12379305bD

Nearest trunked radio sites

Distances are measured from the center of Eugene.

Newport · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 27 (hex 1B) · NAC 6B2 · about 2 mi away
Control 857.9625, 858.5125, 859.9625
Voice 851.975, 858.9625
Covington · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 26 (hex 1A) · NAC 6B6 · about 13 mi away
Control 853.3625, 853.9
Voice 851.3625, 852.3625, 852.8625, 855.2375
INDOC Rockville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 89 (hex 59) · NAC 6B4 · about 18 mi away
Control 853.2375, 859.5375
Voice 851.175
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Eugene?

We do not have a fire dispatch channel listed specifically for Eugene. The county-level fire dispatch channels in the same county: Vermillion County Fire 154.2200 MHz, narrow FM, 210.7 PL.

Do fire departments and EMS use a trunked radio system in Eugene?

Yes. The county-level systems that cover Eugene are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Eugene?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Eugene?

For Eugene, start with the Newport site of Indiana Project Hoosier SAFE-T. Its control channels are 857.9625, 858.5125, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.