About Fort Campbell North Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fort Campbell North: County Public Safety 154.4450 MHz, narrow FM, 156.7 PL. Trunked: Christian County, for example Christian County Fire talkgroup 19 (hex 13).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Christian County: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fort Campbell North, start with the Oak Grove site of Christian County, about 3 miles away. Its control channels: 453.225, 453.35, 453.5 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Christian County channels that also cover Fort Campbell North
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | Christian County Fire/Rescue Paging | 154.4450 | 156.7 PL | FMN | KKR592 |
| County Public Safety | Hopkinsville Fire Paging | 155.7600 | 123.0 PL | FMN | WRPL284 |
Christian County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Christian County Fire | Todd Mutual | 19 | 13 | D |
3 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Christian County Fire | Christian County Fire Dispatch | 6 | 6 | D Encrypted |
| Christian County Fire | Christian County Fire Operations | 7 | 7 | D Encrypted |
| Christian County EMS | Christian County EMS Dispatch | 10 | a | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Fort Campbell North.
Common questions
What frequency does the fire department use in Fort Campbell North?
We do not have a fire dispatch channel listed specifically for Fort Campbell North. The county-level fire dispatch channels in the same county: County Public Safety 154.4450 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Fort Campbell North?
Yes. The county-level systems that cover Fort Campbell North are Fire and EMS talkgroups are listed for Christian County: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fort Campbell North?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fort Campbell North?
For Fort Campbell North, start with the Oak Grove site of Christian County. Its control channels are 453.225, 453.35, 453.5, 453.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.