Fairview also extends into Christian County.
About Fairview Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fairview: Todd County Fire 151.2500 MHz, narrow FM, 179.9 PL. Trunked: Todd County Public Safety, for example Todd County Fire talkgroup 10 (hex a).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Todd County Public Safety: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fairview, start with the Pembroke Water Tank site of Christian County, about 6 miles away. Its control channels: 453.28125, 453.6, 460.025 MHz.
Data updated .
Todd County channels that also cover Fairview
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County Fire | Todd County Fire – Dispatch | 151.2500 In 155.9700 | 179.9 PL | FMN | WNAL799 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County Fire | Todd County Fire – Tactical Channel | 154.1900 | 146.2 PL | FMN | WNAL799 |
| Todd County Fire | Rescue Squad Tactical | 155.1750 | 156.7 PL | FMN | WNSE866 |
| Todd County Fire | Rescue Squad | 155.5950 In 159.3600 | 156.7 PL | FMN | WNSE866 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County EMS | EMS Backup | 151.2500 In 155.9700 | 167.9 PL | FMN | WNAL799 |
Todd County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Todd County Fire | Todd County Fire – Dispatch | 10 | a | D |
| Todd County EMS | Todd County EMS – Dispatch | 11 | b | D |
Nearest trunked radio sites
Distances are measured from the center of Fairview.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fairview?
We do not have a fire dispatch channel listed specifically for Fairview. The county-level fire dispatch channels in the same county: Todd County Fire 151.2500 MHz, narrow FM, 179.9 PL.
Do fire departments and EMS use a trunked radio system in Fairview?
Yes. The county-level systems that cover Fairview are Fire and EMS talkgroups are listed for Todd County Public Safety: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fairview?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fairview?
For Fairview, start with the Pembroke Water Tank site of Christian County. Its control channels are 453.28125, 453.6, 460.025, 460.29375 MHz. Program a control channel first; the scanner finds the voice channels from it.