Skip to content

Allensville Fire and EMS Frequencies

We do not have frequencies listed specifically for Allensville in Todd County, Kentucky yet. Countywide channels for Todd County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Guthrie (Todd County Public Safety), about 7 miles away.

About Allensville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Allensville: Todd County Fire 151.2500 MHz, narrow FM, 179.9 PL. Trunked: Todd County Public Safety, for example Todd County Fire talkgroup 10 (hex a).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Todd County Public Safety: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Allensville, start with the Guthrie site of Todd County Public Safety, about 7 miles away. Its control channels: 460.06875 MHz.

Data updated .

Todd County channels that also cover Allensville

Fire Dispatch

Fire Dispatch frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County FireTodd County Fire – Dispatch151.2500
In 155.9700
179.9 PLFMNWNAL799

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County FireTodd County Fire – Tactical Channel154.1900146.2 PLFMNWNAL799
Todd County FireRescue Squad Tactical155.1750156.7 PLFMNWNSE866
Todd County FireRescue Squad155.5950
In 159.3600
156.7 PLFMNWNSE866

EMS Tactical

EMS Tactical frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County EMSEMS Backup151.2500
In 155.9700
167.9 PLFMNWNAL799

Todd County Public Safety

Todd County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Todd County FireTodd County Fire – Dispatch10aD
Todd County EMSTodd County EMS – Dispatch11bD

Nearest trunked radio sites

Distances are measured from the center of Allensville.

Guthrie · Todd County Public Safety
Site 2 (hex 2) · about 7 mi away
Control 460.06875
Voice 453.38125, 460.36875, 460.60625
Allegre · KY SERVS
RFSS 3 · Site 112 (hex 70) · NAC 9CC · about 10 mi away
Control 771.95625, 772.40625, 772.68125, 772.93125
Voice 771.20625, 771.68125
Elkton · Todd County Public Safety
Site 1 (hex 1) · about 10 mi away
Control 453.19375
Voice 453.18125, 453.275, 453.6625, 460.1
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Allensville?

We do not have a fire dispatch channel listed specifically for Allensville. The county-level fire dispatch channels in the same county: Todd County Fire 151.2500 MHz, narrow FM, 179.9 PL.

Do fire departments and EMS use a trunked radio system in Allensville?

Yes. The county-level systems that cover Allensville are Fire and EMS talkgroups are listed for Todd County Public Safety: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Allensville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Allensville?

For Allensville, start with the Guthrie site of Todd County Public Safety. Its control channels are 460.06875 MHz. Program a control channel first; the scanner finds the voice channels from it.