Skip to content

High Bridge Fire and EMS Frequencies

We do not have frequencies listed specifically for High Bridge in Jessamine County, Kentucky yet. Countywide channels for Jessamine County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Versailles (KY SERVS), about 14 miles away.

About High Bridge Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers High Bridge: Jessamine County Fire 154.3250 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers High Bridge: Jessamine County EMS 462.9750 MHz, P25, NAC 867.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (NXDN96, P25), which needs a scanner that decodes those modes.

Data updated .

Jessamine County channels that also cover High Bridge

Fire Dispatch

Fire Dispatch frequencies for Jessamine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jessamine County FireJessamine County Fire – Dispatch (analog)154.3250
In 153.9500
103.5 PLFMNWNQX208
Jessamine County FireJessamine County Fire – Dispatch (digital)154.3250
In 153.9500
RAN 27NXDN96WNQX208

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jessamine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jessamine County FireSevere WX Siren Activation155.9400
In 151.0700
100.0 PLFMWPMA242

Fire Talk-around

Fire Talk-around frequencies for Jessamine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jessamine County FireJessamine County Fire – Fire Ground155.2800103.5 PLFMWNKT353

EMS Dispatch

EMS Dispatch frequencies for Jessamine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jessamine County EMSJessamine County EMS – Dispatch462.9750
In 467.9750
NAC 867P25WNUF743

EMS Talk-around

EMS Talk-around frequencies for Jessamine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jessamine County EMSEMS Hospital Phone Patch453.8250
In 458.8250
NAC 868P25WNVX691

Hospitals & Medical

Hospitals & Medical frequencies for Jessamine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jessamine County HospitalEMS to Lexington Hospitals463.0000
In 468.0000
94.8 PLFMWNUF743

Nearest trunked radio sites

Distances are measured from the center of High Bridge.

Versailles · KY SERVS
RFSS 3 · Site 54 (hex 36) · NAC 9C4 · about 14 mi away
Control 773.65625
Voice 769.60625, 771.08125, 772.00625, 772.63125
Blue Grass Airport · Lexington-Fayette Urban County Government (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 41F · about 15 mi away
Control 852.0375, 852.5375
Voice 851.5625
Patterson Office Tower · University of Kentucky
RFSS 1 · Site 1 (hex 1) · NAC 001 · about 19 mi away
Control 854.7125, 855.2125, 856.2625, 856.9375, 857.2625, 857.9375, 858.2625, 859.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in High Bridge?

We do not have a fire dispatch channel listed specifically for High Bridge. The county-level fire dispatch channels in the same county: Jessamine County Fire 154.3250 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in High Bridge?

We do not have a EMS dispatch channel listed specifically for High Bridge. The county-level EMS dispatch channels in the same county: Jessamine County EMS 462.9750 MHz, P25, NAC 867.

What scanner do I need to listen to fire and EMS in High Bridge?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96, P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in High Bridge?

For High Bridge, start with the Versailles site of KY SERVS. Its control channels are 773.65625 MHz. Program a control channel first; the scanner finds the voice channels from it.