Skip to content

Burgin Fire and EMS Frequencies

We do not have frequencies listed specifically for Burgin in Mercer County, Kentucky yet. Countywide channels for Mercer County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Versailles (KY SERVS), about 19 miles away.

About Burgin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Burgin: Fire and EMS 158.7600 MHz, NXDN96, RAN 1. County-level ems dispatch that covers Burgin: Fire and EMS 154.2425 MHz, narrow FM, 465 DPL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN96, NXDN48), which needs a scanner that decodes those modes.

Data updated .

Mercer County channels that also cover Burgin

Fire Dispatch

Fire Dispatch frequencies for Mercer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSFire and EMS – Dispatch158.7600
In 151.1075
RAN 1NXDN96WQBK412

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Mercer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSMercer/Burgin Fire Department Fireground153.8300114.8 PLFMNWPWC278
Fire and EMSFire and EMS – Fire Ground154.0700114.8 PLFMWPSJ366
Fire and EMSFire and EMS – Fire Ground155.6700114.8 PLFMWPSJ366

EMS Dispatch

EMS Dispatch frequencies for Mercer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSFire and EMS – Dispatch (analog)154.2425
In 159.0000
465 DPLFMNWQQY316
Fire and EMSFire and EMS – Dispatch (digital)154.2425
In 159.0000
RAN 50NXDN48WQQY316

Hospitals & Medical

Hospitals & Medical frequencies for Mercer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSEMS To Haggin Hospital155.3400127.3 PLFMWPWC989

Nearest trunked radio sites

Distances are measured from the center of Burgin.

Versailles · KY SERVS
RFSS 3 · Site 54 (hex 36) · NAC 9C4 · about 19 mi away
Control 773.65625
Voice 769.60625, 771.08125, 772.00625, 772.63125
Blue Grass Airport · Lexington-Fayette Urban County Government (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 41F · about 21 mi away
Control 852.0375, 852.5375
Voice 851.5625
Springfield · KY SERVS
RFSS 3 · Site 58 (hex 3A) · NAC 9C9 · about 23 mi away
Control 774.65625
Voice 769.33125, 771.56875, 772.49375, 773.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Burgin?

We do not have a fire dispatch channel listed specifically for Burgin. The county-level fire dispatch channels in the same county: Fire and EMS 158.7600 MHz, NXDN96, RAN 1.

What frequency does EMS or the ambulance service use in Burgin?

We do not have a EMS dispatch channel listed specifically for Burgin. The county-level EMS dispatch channels in the same county: Fire and EMS 154.2425 MHz, narrow FM, 465 DPL.

What scanner do I need to listen to fire and EMS in Burgin?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96, NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Burgin?

For Burgin, start with the Versailles site of KY SERVS. Its control channels are 773.65625 MHz. Program a control channel first; the scanner finds the voice channels from it.