About Salvisa Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Salvisa: Fire and EMS 158.7600 MHz, NXDN96, RAN 1. County-level ems dispatch that covers Salvisa: Fire and EMS 154.2425 MHz, narrow FM, 465 DPL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN96, NXDN48), which needs a scanner that decodes those modes.
Data updated .
Mercer County channels that also cover Salvisa
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | Fire and EMS – Dispatch | 158.7600 In 151.1075 | RAN 1 | NXDN96 | WQBK412 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | Mercer/Burgin Fire Department Fireground | 153.8300 | 114.8 PL | FMN | WPWC278 |
| Fire and EMS | Fire and EMS – Fire Ground | 154.0700 | 114.8 PL | FM | WPSJ366 |
| Fire and EMS | Fire and EMS – Fire Ground | 155.6700 | 114.8 PL | FM | WPSJ366 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | Fire and EMS – Dispatch (analog) | 154.2425 In 159.0000 | 465 DPL | FMN | WQQY316 |
| Fire and EMS | Fire and EMS – Dispatch (digital) | 154.2425 In 159.0000 | RAN 50 | NXDN48 | WQQY316 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | EMS To Haggin Hospital | 155.3400 | 127.3 PL | FM | WPWC989 |
Nearest trunked radio sites
Distances are measured from the center of Salvisa.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Salvisa?
We do not have a fire dispatch channel listed specifically for Salvisa. The county-level fire dispatch channels in the same county: Fire and EMS 158.7600 MHz, NXDN96, RAN 1.
What frequency does EMS or the ambulance service use in Salvisa?
We do not have a EMS dispatch channel listed specifically for Salvisa. The county-level EMS dispatch channels in the same county: Fire and EMS 154.2425 MHz, narrow FM, 465 DPL.
What scanner do I need to listen to fire and EMS in Salvisa?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96, NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Salvisa?
For Salvisa, start with the Versailles site of KY SERVS. Its control channels are 773.65625 MHz. Program a control channel first; the scanner finds the voice channels from it.