About Briley Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Briley: Montmorency County Fire 154.3550 MHz, narrow FM, 173.8 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Montmorency County Fire talkgroup 14142 (hex 373e).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Briley, start with the Atlanta site of Michigan's Public Safety Communications System (MPSCS), about 5 miles away. Its control channels: 852.375, 852.875 MHz.
Data updated .
Montmorency County channels that also cover Briley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montmorency County Fire | County Fire Dispatch | 154.3550 In 156.0150 | 173.8 PL | FMN | KKR608 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Montmorency County Fire | Fire/EMS Dispatch | 14142 | 373e | D |
| Montmorency County Fire | Fire Tanker Shuttle | 14144 | 3740 | D |
| Montmorency County EMS | Montmorency County EMS – Dispatch | 4423 | 1147 | D |
| Montmorency County EMS | Stat EMS Dispatch Northern Michigan | 4585 | 11e9 | D |
| Montmorency County EMS | EMS Administration | 4057 | fd9 | D |
| Montmorency County EMS | Tri Township EMS | 4584 | 11e8 | D |
Nearest trunked radio sites
Distances are measured from the center of Briley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Briley?
We do not have a fire dispatch channel listed specifically for Briley. The county-level fire dispatch channels in the same county: Montmorency County Fire 154.3550 MHz, narrow FM, 173.8 PL.
Do fire departments and EMS use a trunked radio system in Briley?
Yes. The county-level systems that cover Briley are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Briley?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Briley?
For Briley, start with the Atlanta site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.375, 852.875 MHz. Program a control channel first; the scanner finds the voice channels from it.