Skip to content

Loud Fire and EMS Frequencies

Loud in Montmorency County, Michigan has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Atlanta (Michigan's Public Safety Communications System (MPSCS)), about 7 miles away.

About Loud Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Loud: Montmorency County Fire 154.3550 MHz, narrow FM, 173.8 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Montmorency County Fire talkgroup 4620 (hex 120c).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 1 talkgroup; Michigan's Public Safety Communications System (MPSCS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Loud, start with the Atlanta site of Michigan's Public Safety Communications System (MPSCS), about 7 miles away. Its control channels: 852.375, 852.875 MHz.

Data updated .

Loud trunked talkgroups

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Montmorency County FireFire/EMS Briley/Loud/Avery/Canada Creek Dispatch4620120cD

Montmorency County channels that also cover Loud

Fire Dispatch

Fire Dispatch frequencies for Montmorency County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montmorency County FireCounty Fire Dispatch154.3550
In 156.0150
173.8 PLFMNKKR608

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Montmorency County FireFire/EMS Dispatch14142373eD
Montmorency County FireFire Tanker Shuttle141443740D
Montmorency County EMSMontmorency County EMS – Dispatch44231147D
Montmorency County EMSStat EMS Dispatch Northern Michigan458511e9D
Montmorency County EMSEMS Administration4057fd9D
Montmorency County EMSTri Township EMS458411e8D

Nearest trunked radio sites

Distances are measured from the center of Loud.

Atlanta · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 10 (hex A) · NAC 792 · about 7 mi away
Control 852.375, 852.875
Voice 851.375, 851.875, 853.875, 855.0875
Mio · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 9 (hex 9) · NAC 796 · about 12 mi away
Control 852.8875, 853.375
Voice 851.475, 852.3625, 856.4125, 861.0375
Curran · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 12 (hex C) · NAC 792 · about 14 mi away
Control 852.9625, 853.95
Voice 851.9875, 852.475, 855.0375, 855.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Loud?

We do not have a fire dispatch channel listed specifically for Loud. The county-level fire dispatch channels in the same county: Montmorency County Fire 154.3550 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Loud?

Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Loud?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Loud?

For Loud, start with the Atlanta site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.375, 852.875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Loud fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Loud are marked encrypted.