About Elmer Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Elmer: Big Creek Township - Luzerne Fire 154.1300 MHz, narrow FM, no tone; Comins Township - Fairview Fire 154.3250 MHz, narrow FM, 186.2 PL; Greenwood Township Fire 154.4150 MHz, narrow FM, 114.8 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Oscoda County Fire talkgroup 4514 (hex 11a2).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Elmer, start with the Mio site of Michigan's Public Safety Communications System (MPSCS), about 2 miles away. Its control channels: 852.8875, 853.375 MHz.
Data updated .
Oscoda County channels that also cover Elmer
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Big Creek Township - Luzerne Fire | Big Creek Fire Department | 154.1300 | FMN | WPKM374 | |
| Comins Township - Fairview Fire | Commins / Fairview Fire Department | 154.3250 In 153.9500 | 186.2 PL | FMN | WPIW209 |
| Greenwood Township Fire | Greenwood Fire Department | 154.4150 In 153.8900 | 114.8 PL | FMN | KNGX601 |
| Tri-Town/ Mio / Mckinley Fire Departments | Tri-Town / Mio / Mckinley Fire Departments | 155.3850 In 150.7900 | 125 DPL | FMN | WPKM374 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Big Creek Township - Luzerne Fire | Luzerne Fire Department | 151.2950 In 159.3750 | FMN | WPKM374 | |
| Big Creek Township - Luzerne Fire | Big Creek Fireground | 154.2650 | FMN | WPKM374 | |
| Big Creek Township - Luzerne Fire | Big Creek Fireground | 154.2800 | FMN | WPKM374 | |
| Big Creek Township - Luzerne Fire | Big Creek Fireground | 154.3400 | FMN | WPKM374 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oscoda County Hospital | Oscoda EMS-to-Munson Grayling Hospital | 155.6250 In 154.8150 | 179.9 PL | FMN | KFQ960 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Oscoda County Fire | Oscoda County Fire – Dispatch | 4514 | 11a2 | D |
| Oscoda County Fire | PAGE Group | 4893 | 131d | D |
| Oscoda County Fire | Tritown Tactical | 4517 | 11a5 | D |
| Oscoda County Fire | McKinley Tactical | 4892 | 131c | D |
| Oscoda County EMS | Oscoda County EMS – Dispatch | 4511 | 119f | D |
Nearest trunked radio sites
Distances are measured from the center of Elmer.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Elmer?
We do not have a fire dispatch channel listed specifically for Elmer. The county-level fire dispatch channels in the same county: Big Creek Township - Luzerne Fire 154.1300 MHz, narrow FM, no tone; Comins Township - Fairview Fire 154.3250 MHz, narrow FM, 186.2 PL; Greenwood Township Fire 154.4150 MHz, narrow FM, 114.8 PL; Tri-Town/ Mio / Mckinley Fire Departments 155.3850 MHz, narrow FM, 125 DPL.
Do fire departments and EMS use a trunked radio system in Elmer?
Yes. The county-level systems that cover Elmer are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Elmer?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Elmer?
For Elmer, start with the Mio site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.8875, 853.375 MHz. Program a control channel first; the scanner finds the voice channels from it.