Skip to content

Albert Fire and EMS Frequencies

We do not have frequencies listed specifically for Albert in Montmorency County, Michigan yet. Countywide channels for Montmorency County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Atlanta (Michigan's Public Safety Communications System (MPSCS)), about 5 miles away.

About Albert Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Albert: Montmorency County Fire 154.3550 MHz, narrow FM, 173.8 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Montmorency County Fire talkgroup 14142 (hex 373e).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Albert, start with the Atlanta site of Michigan's Public Safety Communications System (MPSCS), about 5 miles away. Its control channels: 852.375, 852.875 MHz.

Data updated .

Montmorency County channels that also cover Albert

Fire Dispatch

Fire Dispatch frequencies for Montmorency County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montmorency County FireCounty Fire Dispatch154.3550
In 156.0150
173.8 PLFMNKKR608

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Montmorency County FireFire/EMS Dispatch14142373eD
Montmorency County FireFire Tanker Shuttle141443740D
Montmorency County EMSMontmorency County EMS – Dispatch44231147D
Montmorency County EMSStat EMS Dispatch Northern Michigan458511e9D
Montmorency County EMSEMS Administration4057fd9D
Montmorency County EMSTri Township EMS458411e8D

Nearest trunked radio sites

Distances are measured from the center of Albert.

Atlanta · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 10 (hex A) · NAC 792 · about 5 mi away
Control 852.375, 852.875
Voice 851.375, 851.875, 853.875, 855.0875
Mio · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 9 (hex 9) · NAC 796 · about 11 mi away
Control 852.8875, 853.375
Voice 851.475, 852.3625, 856.4125, 861.0375
Lovells · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 16 (hex 10) · NAC 798 · about 13 mi away
Control 852.4, 853.9
Voice 851.4, 851.9, 852.6125, 853.6625, 854.1875, 854.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Albert?

We do not have a fire dispatch channel listed specifically for Albert. The county-level fire dispatch channels in the same county: Montmorency County Fire 154.3550 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Albert?

Yes. The county-level systems that cover Albert are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Albert?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Albert?

For Albert, start with the Atlanta site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.375, 852.875 MHz. Program a control channel first; the scanner finds the voice channels from it.