About Carver County Fire and EMS Frequencies
Quick answer: Fire dispatch for Carver County: Carver County Fire 154.1000 MHz, narrow FM, 151.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Carver County Fire talkgroup 2716 (hex a9c).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Carver County, start with the Carver - Scott Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.8875, 852.075, 852.4375 MHz.
Data updated .
Carver County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carver County Fire | PAGE | 154.1000 | 151.4 PL | FMN | KWM572 |
Carver County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Carver County Fire | Carver County Fire Main | 2716 | a9c | D |
| Carver County Fire | Fire Subsystem Roaming | 2758 | ac6 | D |
| Carver County Fire | Carver County Fire MA | 2732 | aac | D |
| Carver County Fire | Carver County Fire MA | 2734 | aae | D |
| Carver County Fire | Carver County Fire/LE Shared | 2808 | af8 | D |
| Carver County Fire | Carver City Fire Administration | 2736 | ab0 | D |
| Carver County Fire | Fire Administration | 2858 | b2a | D |
| Carver County EMS | Carver Countywide EMS | 2816 | b00 | D |
Radio system sites in Carver County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Carver County
Common questions
What frequency does the fire department use in Carver County?
Fire dispatch channels listed for Carver County: Carver County Fire 154.1000 MHz, narrow FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in Carver County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Carver County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Carver County?
For Carver County, start with the Carver - Scott Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.8875, 852.075, 852.4375, 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Carver County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Carver County are marked encrypted.
Are Carver County fire and EMS talkgroups encrypted?
None of the 8 talkgroups listed for Carver County are marked encrypted.