About Hollywood Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hollywood: Carver County Fire 154.1000 MHz, narrow FM, 151.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Carver County Fire talkgroup 2716 (hex a9c).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hollywood, start with the McLeod Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 18 miles away. Its control channels: 852.75, 853.125 MHz.
Data updated .
Carver County channels that also cover Hollywood
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carver County Fire | PAGE | 154.1000 | 151.4 PL | FMN | KWM572 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Carver County Fire | Carver County Fire Main | 2716 | a9c | D |
| Carver County Fire | Fire Subsystem Roaming | 2758 | ac6 | D |
| Carver County Fire | Carver County Fire MA | 2732 | aac | D |
| Carver County Fire | Carver County Fire MA | 2734 | aae | D |
| Carver County Fire | Carver County Fire/LE Shared | 2808 | af8 | D |
| Carver County Fire | Carver City Fire Administration | 2736 | ab0 | D |
| Carver County Fire | Fire Administration | 2858 | b2a | D |
| Carver County EMS | Carver Countywide EMS | 2816 | b00 | D |
Nearest trunked radio sites
Distances are measured from the center of Hollywood.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hollywood?
We do not have a fire dispatch channel listed specifically for Hollywood. The county-level fire dispatch channels in the same county: Carver County Fire 154.1000 MHz, narrow FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in Hollywood?
Yes. The county-level systems that cover Hollywood are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hollywood?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hollywood?
For Hollywood, start with the McLeod Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.75, 853.125 MHz. Program a control channel first; the scanner finds the voice channels from it.