About New Germany Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers New Germany: Carver County Fire 154.1000 MHz, narrow FM, 151.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example New Germany Fire talkgroup 2748 (hex abc).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For New Germany, start with the McLeod Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 15 miles away. Its control channels: 852.75, 853.125 MHz.
Data updated .
New Germany trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| New Germany Fire | New Germany Fire Administration | 2748 | abc | D |
Carver County channels that also cover New Germany
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carver County Fire | PAGE | 154.1000 | 151.4 PL | FMN | KWM572 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Carver County Fire | Carver County Fire Main | 2716 | a9c | D |
| Carver County Fire | Fire Subsystem Roaming | 2758 | ac6 | D |
| Carver County Fire | Carver County Fire MA | 2732 | aac | D |
| Carver County Fire | Carver County Fire MA | 2734 | aae | D |
| Carver County Fire | Carver County Fire/LE Shared | 2808 | af8 | D |
| Carver County Fire | Carver City Fire Administration | 2736 | ab0 | D |
| Carver County Fire | Fire Administration | 2858 | b2a | D |
| Carver County EMS | Carver Countywide EMS | 2816 | b00 | D |
Nearest trunked radio sites
Distances are measured from the center of New Germany.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in New Germany?
We do not have a fire dispatch channel listed specifically for New Germany. The county-level fire dispatch channels in the same county: Carver County Fire 154.1000 MHz, narrow FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in New Germany?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in New Germany?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in New Germany?
For New Germany, start with the McLeod Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.75, 853.125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are New Germany fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for New Germany are marked encrypted.