Skip to content

Montrose Fire and EMS Frequencies

Montrose in Wright County, Minnesota has 0 conventional frequencies and 3 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Hennepin Co. West Simulcast (Allied Radio Matrix for Emergency Response (ARMER)), about 17 miles away.

About Montrose Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Montrose: Wright County Fire 154.3250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Montrose Fire talkgroup 25342 (hex 62fe).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups; Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Montrose, start with the Hennepin Co. West Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 17 miles away. Its control channels: 852.2625, 852.6125, 853.6375 MHz.

Data updated .

Montrose trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Montrose FireMontrose Fire2534262feD
Montrose FireMontrose Fire2534362ffD
Montrose FireMontrose Fire253446300D

Wright County channels that also cover Montrose

Fire Dispatch

Fire Dispatch frequencies for Wright County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wright County FireFire Paging154.3250CSQFMNWGI966

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Wright County FireCounty Fire2530062d4D
Wright County FireCounty Fire Tactical2530262d6D
Wright County FireCounty Fire Tactical2530362d7D
Wright County FireCounty Fire Tactical2530462d8D
Wright County FireCounty Fire Tactical2530562d9D
Wright County FireCounty Fire Tactical2530662daD
Wright County FireCounty Fire Tactical2530762dbD
Wright County FireCounty Fire Tactical2530862dcD
Wright County FireCounty Fire Tactical2530962ddD
Wright County EMSCounty EMS25357630dD
Wright County EMSCounty EMS25358630eD

Nearest trunked radio sites

Distances are measured from the center of Montrose.

Hennepin Co. West Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 2 (hex 2) · NAC 40E · about 17 mi away
Control 852.2625, 852.6125, 853.6375, 853.8875
Voice 851.4125, 851.9125, 851.9625, 852.4125, 852.8625, 852.9125, 853.4125, 854.4125, 856.7125, 857.7125, 858.2125, 859.7125
Sherburne - Wright Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 40 (hex 28) · NAC 40F · about 21 mi away
Control 851.475, 851.85
Voice 851.175, 851.275, 851.575, 852.325, 852.775, 852.9, 853.175, 853.575, 858.3625
McLeod Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 45 (hex 2D) · about 24 mi away
Control 852.75, 853.125
Voice 851.075, 851.4, 852.1, 852.4625, 853.4
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Montrose?

We do not have a fire dispatch channel listed specifically for Montrose. The county-level fire dispatch channels in the same county: Wright County Fire 154.3250 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Montrose?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Montrose?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Montrose?

For Montrose, start with the Hennepin Co. West Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.2625, 852.6125, 853.6375, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Montrose fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Montrose are marked encrypted.