Skip to content

Middleville Fire and EMS Frequencies

We do not have frequencies listed specifically for Middleville in Wright County, Minnesota yet. Countywide channels for Wright County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kimball (Allied Radio Matrix for Emergency Response (ARMER)), about 18 miles away.

About Middleville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Middleville: Wright County Fire 154.3250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wright County Fire talkgroup 25300 (hex 62d4).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Middleville, start with the Kimball site of Allied Radio Matrix for Emergency Response (ARMER), about 18 miles away. Its control channels: 851.9875, 853.675 MHz.

Data updated .

Wright County channels that also cover Middleville

Fire Dispatch

Fire Dispatch frequencies for Wright County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wright County FireFire Paging154.3250CSQFMNWGI966

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Wright County FireCounty Fire2530062d4D
Wright County FireCounty Fire Tactical2530262d6D
Wright County FireCounty Fire Tactical2530362d7D
Wright County FireCounty Fire Tactical2530462d8D
Wright County FireCounty Fire Tactical2530562d9D
Wright County FireCounty Fire Tactical2530662daD
Wright County FireCounty Fire Tactical2530762dbD
Wright County FireCounty Fire Tactical2530862dcD
Wright County FireCounty Fire Tactical2530962ddD
Wright County EMSCounty EMS25357630dD
Wright County EMSCounty EMS25358630eD

Nearest trunked radio sites

Distances are measured from the center of Middleville.

Kimball · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 11 (hex B) · about 18 mi away
Control 851.9875, 853.675
Voice 851.725, 852.1875, 852.25, 852.35, 852.4875, 852.9, 854.7375
Meeker Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 43 (hex 2B) · about 21 mi away
Control 852.225, 853.875
Voice 851.1, 852.625, 853.325, 854.5375, 856.0625, 856.4625, 857.4625, 858.4625
Sherburne - Wright Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 40 (hex 28) · NAC 40F · about 22 mi away
Control 851.475, 851.85
Voice 851.175, 851.275, 851.575, 852.325, 852.775, 852.9, 853.175, 853.575, 858.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Middleville?

We do not have a fire dispatch channel listed specifically for Middleville. The county-level fire dispatch channels in the same county: Wright County Fire 154.3250 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Middleville?

Yes. The county-level systems that cover Middleville are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Middleville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Middleville?

For Middleville, start with the Kimball site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9875, 853.675 MHz. Program a control channel first; the scanner finds the voice channels from it.