About Albion Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Albion: Wright County Fire 154.3250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wright County Fire talkgroup 25300 (hex 62d4).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Albion, start with the Kimball site of Allied Radio Matrix for Emergency Response (ARMER), about 14 miles away. Its control channels: 851.9875, 853.675 MHz.
Data updated .
Wright County channels that also cover Albion
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wright County Fire | Fire Paging | 154.3250 | CSQ | FMN | WGI966 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wright County Fire | County Fire | 25300 | 62d4 | D |
| Wright County Fire | County Fire Tactical | 25302 | 62d6 | D |
| Wright County Fire | County Fire Tactical | 25303 | 62d7 | D |
| Wright County Fire | County Fire Tactical | 25304 | 62d8 | D |
| Wright County Fire | County Fire Tactical | 25305 | 62d9 | D |
| Wright County Fire | County Fire Tactical | 25306 | 62da | D |
| Wright County Fire | County Fire Tactical | 25307 | 62db | D |
| Wright County Fire | County Fire Tactical | 25308 | 62dc | D |
| Wright County Fire | County Fire Tactical | 25309 | 62dd | D |
| Wright County EMS | County EMS | 25357 | 630d | D |
| Wright County EMS | County EMS | 25358 | 630e | D |
Nearest trunked radio sites
Distances are measured from the center of Albion.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Albion?
We do not have a fire dispatch channel listed specifically for Albion. The county-level fire dispatch channels in the same county: Wright County Fire 154.3250 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Albion?
Yes. The county-level systems that cover Albion are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Albion?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Albion?
For Albion, start with the Kimball site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9875, 853.675 MHz. Program a control channel first; the scanner finds the voice channels from it.