Skip to content

Wright County Fire and EMS Frequencies

Wright County in Minnesota has 1 countywide conventional frequency and 11 countywide talkgroups in our database. Use the list of 28 cities and communities below for local fire departments and EMS agencies.

About Wright County Fire and EMS Frequencies

Quick answer: Fire dispatch for Wright County: Wright County Fire 154.3250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wright County Fire talkgroup 25300 (hex 62d4).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wright County, start with the Sherburne - Wright Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.475, 851.85 MHz.

Data updated .

Wright County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Wright County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wright County FireFire Paging154.3250CSQFMNWGI966

Wright County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Wright County FireCounty Fire2530062d4D
Wright County FireCounty Fire Tactical2530262d6D
Wright County FireCounty Fire Tactical2530362d7D
Wright County FireCounty Fire Tactical2530462d8D
Wright County FireCounty Fire Tactical2530562d9D
Wright County FireCounty Fire Tactical2530662daD
Wright County FireCounty Fire Tactical2530762dbD
Wright County FireCounty Fire Tactical2530862dcD
Wright County FireCounty Fire Tactical2530962ddD
Wright County EMSCounty EMS25357630dD
Wright County EMSCounty EMS25358630eD

Radio system sites in Wright County

Program the control channel first; your scanner finds the voice channels from it.

Sherburne - Wright Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 40 (hex 28) · NAC 40F
Control 851.475, 851.85
Voice 851.175, 851.275, 851.575, 852.325, 852.775, 852.9, 853.175, 853.575, 858.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wright County

Common questions

What frequency does the fire department use in Wright County?

Fire dispatch channels listed for Wright County: Wright County Fire 154.3250 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Wright County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wright County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wright County?

For Wright County, start with the Sherburne - Wright Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.475, 851.85 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wright County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Wright County are marked encrypted.

Are Wright County fire and EMS talkgroups encrypted?

None of the 11 talkgroups listed for Wright County are marked encrypted.