Skip to content

Ottawa Fire and EMS Frequencies

We do not have frequencies listed specifically for Ottawa in Le Sueur County, Minnesota yet. Countywide channels for Le Sueur County that may also cover this area are shown below when we have them. The closest trunked radio site we have is LeCenter (Allied Radio Matrix for Emergency Response (ARMER)), about 12 miles away.

About Ottawa Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ottawa: Le Sueur County Fire 154.4000 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Le Sueur County Fire talkgroup 34020 (hex 84e4).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Le Sueur County channels that also cover Ottawa

Fire Dispatch

Fire Dispatch frequencies for Le Sueur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Le Sueur County FireCounty Fire Channel154.4000136.5 PLFMNWQVD952

Hospitals & Medical

Hospitals & Medical frequencies for Le Sueur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Le Sueur County HospitalMinnesota Valley Health Center155.3550136.5 PLFMNWPAQ399

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Le Sueur County FireLe Sueur County Fire – Dispatch3402084e4D
Le Sueur County FireFire All Call340828522D
Le Sueur County HospitalLe Sueur Hospital34090852aD

Nearest trunked radio sites

Distances are measured from the center of Ottawa.

LeCenter · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 32 (hex 20) · about 12 mi away
Voice 851.825, 852.175, 852.375, 852.85, 853.5
Arlington · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 1 (hex 1) · about 16 mi away
Control 851.65, 855.6125
Voice 851.225, 853.15, 859.1125
Nicollet Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 43 (hex 2B) · NAC 405 · about 17 mi away
Control 851.55, 852.825
Voice 851.15, 851.2, 851.825, 851.925, 852.85, 853.075, 853.5, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ottawa?

We do not have a fire dispatch channel listed specifically for Ottawa. The county-level fire dispatch channels in the same county: Le Sueur County Fire 154.4000 MHz, narrow FM, 136.5 PL.

Do fire departments and EMS use a trunked radio system in Ottawa?

Yes. The county-level systems that cover Ottawa are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ottawa?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ottawa?

For Ottawa, start with the Arlington site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.65, 855.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.