About Lake Prairie Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lake Prairie: Nicollet County Fire 154.2500 MHz, narrow FM, CSQ. County-level ems dispatch that covers Lake Prairie: Nicollet County EMS 158.8950 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Nicollet County Fire talkgroup 33810 (hex 8412).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lake Prairie, start with the Gaylord site of Allied Radio Matrix for Emergency Response (ARMER), about 12 miles away. Its control channels: 852.125, 853.625 MHz.
Data updated .
Nicollet County channels that also cover Lake Prairie
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nicollet County Fire | County Fire Paging | 154.2500 In 153.7700 | CSQ | FMN | WQQK743 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nicollet County EMS | St. Peter Community Hospital Ambulance | 158.8950 | 136.5 PL | FMN | WPNT917 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nicollet County Hospital | St. Peter Community Hospital | 155.3550 | 74.4 PL | FMN | KWI817 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Nicollet County Fire | Fire/EMS Dispatch | 33810 | 8412 | D |
| Nicollet County Hospital | St Peter Hospital – River's Edge | 33826 | 8422 | D |
Nearest trunked radio sites
Distances are measured from the center of Lake Prairie.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lake Prairie?
We do not have a fire dispatch channel listed specifically for Lake Prairie. The county-level fire dispatch channels in the same county: Nicollet County Fire 154.2500 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Lake Prairie?
We do not have a EMS dispatch channel listed specifically for Lake Prairie. The county-level EMS dispatch channels in the same county: Nicollet County EMS 158.8950 MHz, narrow FM, 136.5 PL.
Do fire departments and EMS use a trunked radio system in Lake Prairie?
Yes. The county-level systems that cover Lake Prairie are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lake Prairie?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lake Prairie?
For Lake Prairie, start with the Gaylord site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.125, 853.625 MHz. Program a control channel first; the scanner finds the voice channels from it.