About Henderson Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Henderson: Sibley County Fire 156.2400 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Henderson Fire talkgroup 33431 (hex 8297).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Henderson, start with the Arlington site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 851.65, 855.6125 MHz.
Data updated .
Henderson trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Henderson Fire | Henderson Fire Department | 33431 | 8297 | D |
Sibley County channels that also cover Henderson
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sibley County Fire | Sibley County Fire – Paging | 156.2400 In 153.9200 | CSQ | FMN | WRXX242 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sibley County Hospital | Sibley Medical Center | 155.3550 | 186.2 PL | FMN | KKL780 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sibley County Fire | County Fire EMS Dispatch | 33408 | 8280 | D |
| Sibley County Fire | Green Isle T2T | 33428 | 8294 | D |
| Sibley County Hospital | EMH-SMC Sibley Medical Center – Arlington | 33412 | 8284 | D |
Nearest trunked radio sites
Distances are measured from the center of Henderson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Henderson?
We do not have a fire dispatch channel listed specifically for Henderson. The county-level fire dispatch channels in the same county: Sibley County Fire 156.2400 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Henderson?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Henderson?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Henderson?
For Henderson, start with the Arlington site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.65, 855.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Henderson fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Henderson are marked encrypted.