Skip to content

Rock County Fire and EMS Frequencies

Rock County in Minnesota has 4 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Rock County Fire and EMS Frequencies

Quick answer: Fire dispatch for Rock County: Rock County Fire 154.2650 MHz, narrow FM, 141.3 PL. EMS dispatch for Rock County: Rock County EMS 155.9550 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Rock County Fire talkgroup 30902 (hex 78b6).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rock County, start with the Hardwick site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 853.5, 856.9625, 857.2625 MHz.

Data updated .

Rock County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Rock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rock County FireFire Paging154.2650
In 159.1350
141.3 PLFMNWQBD644

EMS Dispatch

EMS Dispatch frequencies for Rock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rock County EMSEMS Paging & Ambulance Communications155.9550
In 153.9800
141.3 PLFMNWNSF990
Rock County EMSRock Co. Ambulance / EMS Paging156.1800
In 153.9200
141.3 PLFMNWNSF990

Hospitals & Medical

Hospitals & Medical frequencies for Rock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rock County HospitalLuverne Community Hospital155.4000141.3 PLFMNKNHX328

Rock County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Rock County FireCounty Fire Dispatch3090278b6D
Rock County EMSRock County EMS – Dispatch3091978c7D
Rock County EMSRock County EMS – Dispatch3092078c8D
Rock County HospitalHospital – EMS3090778bbD

Radio system sites in Rock County

Program the control channel first; your scanner finds the voice channels from it.

Hardwick · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 29 (hex 1D) · NAC 403
Control 853.5, 856.9625, 857.2625
Voice 851.9125, 859.2125
Beaver Creek · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 38 (hex 26) · NAC 402
Control 852.1, 852.4375
Voice 855.7375, 857.9625, 859.4375
Ellsworth · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 39 (hex 27) · NAC 401
Control 858.2375, 859.7125
Voice 853.4625, 858.7125, 858.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Rock County

Common questions

What frequency does the fire department use in Rock County?

Fire dispatch channels listed for Rock County: Rock County Fire 154.2650 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Rock County?

EMS dispatch channels listed for Rock County: Rock County EMS 155.9550 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Rock County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Rock County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Rock County?

For Rock County, start with the Hardwick site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.5, 856.9625, 857.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Rock County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Rock County are marked encrypted.

Are Rock County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Rock County are marked encrypted.