About Battle Plain Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Battle Plain: Rock County Fire 154.2650 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Battle Plain: Rock County EMS 155.9550 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Rock County Fire talkgroup 30902 (hex 78b6).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Battle Plain, start with the Chandler site of Allied Radio Matrix for Emergency Response (ARMER), about 11 miles away. Its control channels: 851.425, 856.4375 MHz.
Data updated .
Rock County channels that also cover Battle Plain
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rock County Fire | Fire Paging | 154.2650 In 159.1350 | 141.3 PL | FMN | WQBD644 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rock County EMS | EMS Paging & Ambulance Communications | 155.9550 In 153.9800 | 141.3 PL | FMN | WNSF990 |
| Rock County EMS | Rock Co. Ambulance / EMS Paging | 156.1800 In 153.9200 | 141.3 PL | FMN | WNSF990 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rock County Hospital | Luverne Community Hospital | 155.4000 | 141.3 PL | FMN | KNHX328 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rock County Fire | County Fire Dispatch | 30902 | 78b6 | D |
| Rock County EMS | Rock County EMS – Dispatch | 30919 | 78c7 | D |
| Rock County EMS | Rock County EMS – Dispatch | 30920 | 78c8 | D |
| Rock County Hospital | Hospital – EMS | 30907 | 78bb | D |
Nearest trunked radio sites
Distances are measured from the center of Battle Plain.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Battle Plain?
We do not have a fire dispatch channel listed specifically for Battle Plain. The county-level fire dispatch channels in the same county: Rock County Fire 154.2650 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Battle Plain?
We do not have a EMS dispatch channel listed specifically for Battle Plain. The county-level EMS dispatch channels in the same county: Rock County EMS 155.9550 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Battle Plain?
Yes. The county-level systems that cover Battle Plain are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Battle Plain?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Battle Plain?
For Battle Plain, start with the Chandler site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.425, 856.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.