About Linn County Fire and EMS Frequencies
Quick answer: Fire dispatch for Linn County: Shelby Fire 158.7825 MHz, narrow FM, 74.4 PL. EMS dispatch for Linn County: Linn County Ambulance District 154.8600 MHz, narrow FM, 251 DPL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Linn County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shelby Fire | Shelby Fire – Dispatch /Local ? | 158.7825 In 153.9125 | 74.4 PL | FMN | WQAS584 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Ambulance District | Linn County Ambulance District – Dispatch – Purdin | 154.8600 In 155.9700 | 251 DPL | FMN | KXC969 |
| Linn County Ambulance District | Linn County Ambulance District – Dispatch – Brookfield | 154.8600 In 155.9700 | 245 DPL | FMN | KXC969 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Ambulance District | Linn County Ambulance District – Alternate | 155.2200 | 141.3 PL | FMN | KXC969 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pershing Memorial Hospital (Brookfield) | Patient Reports | 155.3400 | CSQ | FMN | — |
Radio system sites in Linn County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Linn County
Common questions
What frequency does the fire department use in Linn County?
Fire dispatch channels listed for Linn County: Shelby Fire 158.7825 MHz, narrow FM, 74.4 PL.
What frequency does EMS or the ambulance service use in Linn County?
EMS dispatch channels listed for Linn County: Linn County Ambulance District 154.8600 MHz, narrow FM, 251 DPL.
What scanner do I need to listen to fire and EMS in Linn County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Linn County?
For Linn County, start with the Brookfield 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.16875, 769.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Linn County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Linn County are marked encrypted.