About Brookfield Fire and EMS Frequencies
Quick answer: Fire dispatch for Brookfield: Brookfield Fire 154.3850 MHz, narrow FM, 110.9 PL (expired). County-level ems dispatch that covers Brookfield: Linn County Ambulance District 154.8600 MHz, narrow FM, 251 DPL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Brookfield conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brookfield Fire Expired: Expired 2/25 | Brookfield Fire – Dispatch | 154.3850 In 159.3300 | 110.9 PL | FMN | WPGM276 |
Linn County channels that also cover Brookfield
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shelby Fire | Shelby Fire – Dispatch /Local ? | 158.7825 In 153.9125 | 74.4 PL | FMN | WQAS584 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Ambulance District | Linn County Ambulance District – Dispatch – Purdin | 154.8600 In 155.9700 | 251 DPL | FMN | KXC969 |
| Linn County Ambulance District | Linn County Ambulance District – Dispatch – Brookfield | 154.8600 In 155.9700 | 245 DPL | FMN | KXC969 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Ambulance District | Linn County Ambulance District – Alternate | 155.2200 | 141.3 PL | FMN | KXC969 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pershing Memorial Hospital (Brookfield) | Patient Reports | 155.3400 | CSQ | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Brookfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Brookfield?
Fire dispatch channels listed for Brookfield: Brookfield Fire 154.3850 MHz, narrow FM, 110.9 PL (expired).
What frequency does EMS or the ambulance service use in Brookfield?
We do not have a EMS dispatch channel listed specifically for Brookfield. The county-level EMS dispatch channels in the same county: Linn County Ambulance District 154.8600 MHz, narrow FM, 251 DPL.
What scanner do I need to listen to fire and EMS in Brookfield?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Brookfield?
For Brookfield, start with the Brookfield 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.16875, 769.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Brookfield fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Brookfield are marked encrypted.