Marceline also extends into Chariton County.
About Marceline Fire and EMS Frequencies
Quick answer: Fire dispatch for Marceline: Marceline Fire 155.7900 MHz, narrow FM, 245 DPL. County-level ems dispatch that covers Marceline: Linn County Ambulance District 154.8600 MHz, narrow FM, 251 DPL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Marceline conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marceline Fire | Marceline Fire – Dispatch | 155.7900 In 158.9100 | 245 DPL | FMN | KNAT897 |
Linn County channels that also cover Marceline
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shelby Fire | Shelby Fire – Dispatch /Local ? | 158.7825 In 153.9125 | 74.4 PL | FMN | WQAS584 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Ambulance District | Linn County Ambulance District – Dispatch – Purdin | 154.8600 In 155.9700 | 251 DPL | FMN | KXC969 |
| Linn County Ambulance District | Linn County Ambulance District – Dispatch – Brookfield | 154.8600 In 155.9700 | 245 DPL | FMN | KXC969 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Ambulance District | Linn County Ambulance District – Alternate | 155.2200 | 141.3 PL | FMN | KXC969 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pershing Memorial Hospital (Brookfield) | Patient Reports | 155.3400 | CSQ | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Marceline.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Marceline?
Fire dispatch channels listed for Marceline: Marceline Fire 155.7900 MHz, narrow FM, 245 DPL.
What frequency does EMS or the ambulance service use in Marceline?
We do not have a EMS dispatch channel listed specifically for Marceline. The county-level EMS dispatch channels in the same county: Linn County Ambulance District 154.8600 MHz, narrow FM, 251 DPL.
What scanner do I need to listen to fire and EMS in Marceline?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Marceline?
For Marceline, start with the Brookfield 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.16875, 769.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Marceline fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Marceline are marked encrypted.