Skip to content

Martinsdale Fire and EMS Frequencies

We do not have frequencies listed specifically for Martinsdale in Meagher County, Montana yet. Countywide channels for Meagher County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Townsend (Montana Public Safety Communications System), about 39 miles away.

About Martinsdale Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Martinsdale: Meagher County Fire 154.4000 MHz, narrow FM, no tone. County-level ems dispatch that covers Martinsdale: Meagher County EMS 155.3250 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Meagher County channels that also cover Martinsdale

Fire Dispatch

Fire Dispatch frequencies for Meagher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meagher County FireMeagher County Fire – Dispatch154.4000FMNWNPR804

EMS Dispatch

EMS Dispatch frequencies for Meagher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meagher County EMSMeagher County EMS – Dispatch155.3250FMNWPZY727

EMS Tactical

EMS Tactical frequencies for Meagher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meagher County EMSMeagher County EMS – Tactical Channel155.2800FMNWPZY727

Nearest trunked radio sites

Distances are measured from the center of Martinsdale.

Townsend · Montana Public Safety Communications System
RFSS 1 · Site 9 (hex 9) · NAC 166 · about 39 mi away
Control 142.4625, 149.225
Greycliff · Montana Public Safety Communications System
RFSS 1 · Site 39 (hex 27) · NAC 169 · about 55 mi away
Control 151.34, 173.825
Voice 151.205, 161.9375
Lewistown 800 · Montana Public Safety Communications System
RFSS 1 · Site 57 (hex 39) · NAC 160 · about 59 mi away
Control 851.6, 852.775
Voice 851.075, 851.325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Martinsdale?

We do not have a fire dispatch channel listed specifically for Martinsdale. The county-level fire dispatch channels in the same county: Meagher County Fire 154.4000 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Martinsdale?

We do not have a EMS dispatch channel listed specifically for Martinsdale. The county-level EMS dispatch channels in the same county: Meagher County EMS 155.3250 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Martinsdale?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Martinsdale?

For Martinsdale, start with the Townsend site of Montana Public Safety Communications System. Its control channels are 142.4625, 149.225 MHz. Program a control channel first; the scanner finds the voice channels from it.