About Bedford County Fire and EMS Frequencies
Quick answer: Fire dispatch for Bedford County: Bedford County Fire 453.4750 MHz, narrow FM, 131.8 PL (backup). EMS dispatch for Bedford County: Bedford County EMS 155.1450 MHz, narrow FM, 186.2 PL (backup).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Bedford County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bedford County Fire Backup | Bedford County Fire – Dispatch | 453.4750 In 458.4750 | 131.8 PL | FMN | KNDE706 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bedford County EMS Backup | Bedford County EMS – Dispatch | 155.1450 In 153.7850 | 186.2 PL | FMN | WPCT509 |
Radio system sites in Bedford County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Bedford County
Common questions
What frequency does the fire department use in Bedford County?
Fire dispatch channels listed for Bedford County: Bedford County Fire 453.4750 MHz, narrow FM, 131.8 PL (backup).
What frequency does EMS or the ambulance service use in Bedford County?
EMS dispatch channels listed for Bedford County: Bedford County EMS 155.1450 MHz, narrow FM, 186.2 PL (backup).
What scanner do I need to listen to fire and EMS in Bedford County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Bedford County?
For Bedford County, start with the Bedford 911 (Shelbyville) site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.05 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Bedford County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Bedford County are marked encrypted.