Skip to content

Shelbyville Fire and EMS Frequencies

Shelbyville in Bedford County, Tennessee has 1 conventional frequency and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Bedford 911 (Shelbyville) (Tennessee Advanced Communications Network (TACN)), about 1 miles away.

About Shelbyville Fire and EMS Frequencies

Quick answer: Fire dispatch for Shelbyville: Shelbyville Fire 453.8250 MHz, DMR, CC 5 · TG 422 · SL 1 (backup). County-level ems dispatch that covers Shelbyville: Bedford County EMS 155.1450 MHz, narrow FM, 186.2 PL (backup). Trunked: Tennessee Advanced Communications Network (TACN), for example TN-Bedford Co-Public Safety talkgroup 49731 (hex c243).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Shelbyville, start with the Bedford 911 (Shelbyville) site of Tennessee Advanced Communications Network (TACN), about 1 miles away. Its control channels: 851.05 MHz.

Data updated .

Shelbyville conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Shelbyville
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shelbyville Fire BackupShelbyville Fire – Tone-Outs/Dispatch/Operations453.8250
In 458.8250
CC 5 · TG 422 · SL 1DMRWNLY257

Shelbyville trunked talkgroups

Tennessee Advanced Communications Network (TACN)

Tennessee Advanced Communications Network (TACN) talkgroups
AgencyDescriptionTalkgroupHexMode
TN-Bedford Co-Public SafetyShelbyville Fire – Dispatch49731c243T

Bedford County channels that also cover Shelbyville

Fire Dispatch

Fire Dispatch frequencies for Bedford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bedford County Fire BackupBedford County Fire – Dispatch453.4750
In 458.4750
131.8 PLFMNKNDE706

EMS Dispatch

EMS Dispatch frequencies for Bedford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bedford County EMS BackupBedford County EMS – Dispatch155.1450
In 153.7850
186.2 PLFMNWPCT509

Nearest trunked radio sites

Distances are measured from the center of Shelbyville.

Bedford 911 (Shelbyville) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 39 (hex 27) · about 1 mi away
Control 851.05
Voice 851.45, 851.725, 852.6625, 852.975, 853.1875
Hawthorne Hill · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 81 (hex 51) · NAC 2A5 · about 8 mi away
Control 769.54375, 771.04375
Voice 771.38125, 772.43125, 772.96875, 773.94375
Rippy Ridge (*) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 40 (hex 28) · about 11 mi away
Control 769.28125
Voice 770.86875, 771.24375, 772.08125, 772.70625, 774.20625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Shelbyville?

Fire dispatch channels listed for Shelbyville: Shelbyville Fire 453.8250 MHz, DMR, CC 5 · TG 422 · SL 1 (backup).

What frequency does EMS or the ambulance service use in Shelbyville?

We do not have a EMS dispatch channel listed specifically for Shelbyville. The county-level EMS dispatch channels in the same county: Bedford County EMS 155.1450 MHz, narrow FM, 186.2 PL (backup).

Do fire departments and EMS use a trunked radio system in Shelbyville?

Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Shelbyville?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Shelbyville?

For Shelbyville, start with the Bedford 911 (Shelbyville) site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.05 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Shelbyville fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Shelbyville are marked encrypted.

Are Shelbyville fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Shelbyville are marked encrypted.