Skip to content

Normandy Fire and EMS Frequencies

We do not have frequencies listed specifically for Normandy in Bedford County, Tennessee yet. Countywide channels for Bedford County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rippy Ridge (*) (Tennessee Advanced Communications Network (TACN)), about 1 miles away.

About Normandy Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Normandy: Bedford County Fire 453.4750 MHz, narrow FM, 131.8 PL (backup). County-level ems dispatch that covers Normandy: Bedford County EMS 155.1450 MHz, narrow FM, 186.2 PL (backup).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Bedford County channels that also cover Normandy

Fire Dispatch

Fire Dispatch frequencies for Bedford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bedford County Fire BackupBedford County Fire – Dispatch453.4750
In 458.4750
131.8 PLFMNKNDE706

EMS Dispatch

EMS Dispatch frequencies for Bedford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bedford County EMS BackupBedford County EMS – Dispatch155.1450
In 153.7850
186.2 PLFMNWPCT509

Nearest trunked radio sites

Distances are measured from the center of Normandy.

Rippy Ridge (*) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 40 (hex 28) · about 1 mi away
Control 769.28125
Voice 770.86875, 771.24375, 772.08125, 772.70625, 774.20625
Arnold AFB · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 75 (hex 4B) · NAC 2A0 · about 9 mi away
Control 769.60625
Voice 771.13125, 772.80625, 773.24375, 774.38125, 774.88125
Bedford 911 (Shelbyville) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 39 (hex 27) · about 12 mi away
Control 851.05
Voice 851.45, 851.725, 852.6625, 852.975, 853.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Normandy?

We do not have a fire dispatch channel listed specifically for Normandy. The county-level fire dispatch channels in the same county: Bedford County Fire 453.4750 MHz, narrow FM, 131.8 PL (backup).

What frequency does EMS or the ambulance service use in Normandy?

We do not have a EMS dispatch channel listed specifically for Normandy. The county-level EMS dispatch channels in the same county: Bedford County EMS 155.1450 MHz, narrow FM, 186.2 PL (backup).

What scanner do I need to listen to fire and EMS in Normandy?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Normandy?

For Normandy, start with the Rippy Ridge (*) site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.