Skip to content

Alamo Fire and EMS Frequencies

We do not have frequencies listed specifically for Alamo in Crockett County, Tennessee yet. Countywide channels for Crockett County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Trenton Armory (Tennessee Advanced Communications Network (TACN)), about 15 miles away.

About Alamo Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Alamo: Crockett County Fire 154.1000 MHz, narrow FM, 88.5 PL. County-level ems dispatch that covers Alamo: Crockett County EMS 155.5350 MHz, narrow FM, 206.5 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Crockett County channels that also cover Alamo

Fire Dispatch

Fire Dispatch frequencies for Crockett County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crockett County FireCrockett County Fire – Fire Ground154.100088.5 PLFMNWNBM982
Crockett County FireCrockett County Fire – Dispatch155.0700
In 159.3525
141.3 PLFMNWQQG274

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Crockett County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crockett County Fire Expired: Expired 1/01Rescue Squad (in use??)155.160088.5 PLFMNWNVI658

EMS Dispatch

EMS Dispatch frequencies for Crockett County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crockett County EMSCrockett County EMS – Dispatch155.5350
In 154.6500
206.5 PLFMNKVA412
Crockett County EMSCrockett County EMS – Dispatch155.5350
In 154.6500
RAN 7NXDN96KVA412

Nearest trunked radio sites

Distances are measured from the center of Alamo.

Trenton Armory · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 21 (hex 15) · NAC 2A6 · about 15 mi away
Control 769.33125, 769.85625
Voice 769.58125, 770.20625, 772.40625, 773.78125
Brownsville · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 48 (hex 30) · NAC 2A0 · about 15 mi away
Control 851.0625, 851.275, 851.4375, 851.65
Voice 852.2625, 852.5875
Chestnut Grove · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 29 (hex 1D) · NAC 2A1 · about 15 mi away
Control 770.71875, 771.38125
Voice 770.96875, 771.65625, 771.90625, 772.35625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Alamo?

We do not have a fire dispatch channel listed specifically for Alamo. The county-level fire dispatch channels in the same county: Crockett County Fire 154.1000 MHz, narrow FM, 88.5 PL.

What frequency does EMS or the ambulance service use in Alamo?

We do not have a EMS dispatch channel listed specifically for Alamo. The county-level EMS dispatch channels in the same county: Crockett County EMS 155.5350 MHz, narrow FM, 206.5 PL.

What scanner do I need to listen to fire and EMS in Alamo?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.

What are the control channels for trunked radio in Alamo?

For Alamo, start with the Trenton Armory site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.33125, 769.85625 MHz. Program a control channel first; the scanner finds the voice channels from it.